[Redog]

1. put key in ign and turn to "ON" but don't start it
2. put car in 1 with foot on brake
3. use a flathead screwdriver to pop out staple on gearshift knob
4. pull gearshift knob up
5. gentley pull up the gearshift bezel, and undo light and ETS button(use a small flathead under tab)
6. place gearshift bezel aside
7. gentely pull radio bezel off, start at the botom on bezel in front of cubby
8. place bezel aside after removal
9. three or four 7 mm bolts hold in stock radio, undo all 3 or 4 bolts (I forget how many)
10. pull radio straight out.
11. unplug hardness and anntenna wire from back of radio

After that, I suggest following the instructions on the install kit. The bezels just snap back in place