[k3nd4l]

Originally Posted by Shiwnath

Foglights bolt to the reinforcement bar... you need the whole headlight wiring harness from an alero with fogs IF you want to do it right.. I ghetto wired mine to my battery and got the vent switch and foglight plugs from another Alero... I regret doing it this way every day. They work fine but it looks like garbage.

Supercharger can be found quite easily because GM made a kit for the 2.4
http://www.jegs.com/i/GM-Performance...rentProductId=

Brake upgrade is a simple swap for the front atleast.. 4th gen F-body(Camaro or Firebird) Calipers or 97-04 Corvetee Calipers fit on our cars, but you need 16"+ rims:
http://www.aleromod.com/forums/showt...corvette+brake

For LED interior:
http://www.superbrightleds.com/cgi-b...sp=%2F1157.htm
OR you can try your luck with ebay LEDs which usually crap out on you after a couple months, but are super cheap.

Also read this:
http://www.aleromod.com/forums/showt...ed+ Questions

wow i was off i was just gonna buy one of the fogs from autozone and figured id be able to just attach that one and wire it up .. guess ill have to find a local junkyard

For the supercharger yea i have that link bookmarked but thats my last mod that i plan on doing as its the most expensive.

For those LEDs is it just a simple screw into the older bulb housings? i plan on doing the 5 behind the dash , 1 under the drivers feet , 1 under the passenger seat , 1 in shift area and then a strip in the dome light .. i had originally planned on using the site that Pappa Smurf had in his guide (keyrazyleds.com) but for some reason they only accept money order or directly from bank instead of debit card

And finally for the brake upgrade yea i saw a thread for that and i have it bookmarked so i know what to buy when im up too that