View Single Post
Old 12-29-2012, 05:57 PM   #10
short_circutz
GX Member
 
Join Date: Nov 2012
Location: Sault Ste Marie, ON, Canada
Posts: 9
short_circutz is on a distinguished road
Quote:
Originally Posted by irondiezl3 View Post
what im changing to is 5.25 components in doors and debating between 6x8 components or 6.5 components in the rear. the reason i ask about hz is because pioneers higher end are 35hz much lower than the other which average around 50-60hz but ive never had pioneer speakers so idk if their high end is good? i was also thinking maybe get all jbl to match the amp and the jbl speakers also drop to 2 ohms which the amp can handle but idk if that really means anything quality wise anyway. no sub in car here is some im looking at

The only time advertised frequency response is relevant when comparing speakers is if the frequency response is measured using the same criteria, usually expressed as + or - xxdB. For example, the Pioneers are advertised as having low end to 35 Hz. but is hat +- 3dB? 5dB? 10dB? If, for example, the Pioneers are -10dB at 35 Hz and the other brand is only -3dB at 50 or 60 Hz, if you were to look at a graph of the actual freq response of the two speakers, you will likely find that the low end of the response is quite similar. You cant compare apples and oranges if you need to know how many grapes they contain.
short_circutz is offline   Reply With Quote