|
The issue I ran into was the 4x6 amp turned out to be air cooled and much larger than I expected because I didn't look at the dimensions. I have not seen someone trying to power both 4ohm and 2ohm speakers of different power levels off the same amp. Not saying you can't but I haven't seen anyone using theirs as an example. One set of the speakers is not going to get the proper load. I didn't give the get a 4 channel amp and run two different ohm load speakers with vastly different power ratings off of it much thought to be honest.
I plan on using a distribution block in the trunk run off of 0 gauge from the battery. I' am going to run my Class D, the Excelon 4 channel and the 2 channel 4 ohm to run 4 sets of speakers. 1 pair of subs, 1 pair of 6x9s, 1 pair of 4x6's and 1 pair of 6.5 components. The 6.5s and the 6x9s will be run off the 4 channel. That amp allows the use of 1 set of rca's to power 2 pair of speakers. Should end up with a decent SQ system with a decent amount of punch. All at the scrooge level of spending I currently employ lol.
|