Thread: Some Help
View Single Post
Old 01-02-2005, 10:59 PM   #15
Youngblood77
V.I.P. Member
 
Youngblood77's Avatar
 
Join Date: Apr 2004
Location: Western NY
Posts: 3,133
Youngblood77 is an unknown quantity at this point
Allllllll-righty then ! Back from reseach, and here are my findings: This was taken from the Grand AmGT forums, courtesy of the member sunrunner_pei:

"For my 6.5" mids I used a Metra adapter, part# 82-3300

I had to do a little trimming of the interior door panel to clear the speaker, but it was nothing serious at all. No cutting of metal involved.




For my tweeters, I bought a pair of the plain sail panels (No tweeter hole), then used a hole saw to flush-mount my tweets."








Looks to me like a decent install, especially on the tweets. Notice his use of dynomat on the door panel, a MUST for anything over 4x6's in our doors.

sunrunner_pei's ride is an '03 GaGT, so this install is identical to what would have to be done in our cars. You can do without the Metra adapter and use a 1" spacer cut from wood using a router and a jigsaw, but the plastic adapter makes for a nicer finished product IMHO.

Hope this helps. B)
__________________
Yes it's modded, No it's not done, Yes it's fast, and no you can't drive it. **On a good day, my car has two blowers.

Your car must be fast, you were haulin' ass when I passed you in my 4-door Buick.


Youngblood77 is offline   Reply With Quote