Throwing Codes

[-Alero-]

ok my SES light came on so i went and got it scanned, and here are the results.

P0301
Cylinder 1
misfire detected

P0336
crankshaft position
sensor A
CKT range/perf


ok i can take the plug out and look at it, and possibly change the wires, but im not sure if that will help.

and i changed my crank pulley to the FFP pulley, and im guessing there is a problem there, so i will have to take it apart again to look at it.

any insight is appreciated :tumbleweed:

[FormulaNERD]

looks like you need the dealer to do a case relearn

[-Alero-]

why a relearn? i dont have the PCM maxed out.



so a crankcase relearn would fix this?

[Redog]

^yes

and change out the plugs

[-Alero-]

i just changed my plugs 10k ago........

and its hell taking this plug out! im still working on it! its f***ing rediculas!

[-Alero-]

Originally posted by Redog@Jul 10 2005, 06:38 AM
^yes

Quoted post

did this happen to you when you chanegd your crank pulley?