you wire the red power cable all the way to the battery. Ground to a metal (I used one of the bolts from the struts I think). And remote to the left of what I think is the wiper fuse. Only 25 amp small fuse on the driver side fuse box. If you have an after market hu, just wire the remote to the remote wire in your hu. For your signal, if you have an aftermarket hu, just connect the rca's between that and the amp. If you have stock hu, use the high level inputs (little harness with 4 wires that comes with amp). What you do for that, is splice the wires from the 6x9s in the back and make the connections there.
__________________
http://www.cardomain.com/id/nothingbutolds
Cleared corners-RF P1 Subs- RF 201S Amp- Memphis Audio 4x6's and 6x9's-JVC Arsenal KD-APD89 Head Unit-front and rear z-spec strut tower brace- KYB GR2 struts- Intrax Springs- Magnaflow Muffler
Last edited by Valley olds : 03-03-2009 at 06:53 PM.
Reason: forgot about signal
|