someone has to know

irondiezl3 · 05-15-2008, 11:31 AM

anyone know for sure deffinantly the wiring for the front door speakers and tweeter. i have light green dark green tan and grey the tweeters are red and black i need to know whats positive and negative for all of them?

kniedelm9490 · 05-15-2008, 11:50 AM

.......

[ion] C2 · 05-15-2008, 11:51 AM

no, they're not red and black -_-

Left rear
+ brown
- yellow

Right rear
+ dark blue
- light blue

Left front
+ tan
- gray

Right front
+ light green
- dark green

http://www.aleromod.com/forums/showthread.php?t=9535

irondiezl3 · 05-15-2008, 12:01 PM

ion are you positive

[ion] C2 · 05-15-2008, 12:03 PM

100%.

kniedelm9490 · 05-15-2008, 12:09 PM

idk what u ment but all my shit was black and red in both front doors but the back were as he said mabye mines just really messed up

[ion] C2 · 05-15-2008, 12:12 PM

must be, since each speaker should have different colors of pos/neg since they all don't just run off one wire, you wouldn't want every speaker hooked up to the same wire

Ryan from Ohio · 05-15-2008, 12:23 PM

The tweeter has its own wiring and its different than the 4x6.

Red should be positive, black negative.

If you hook it up wrong it will just be out of phase and its easy to identify a tweeter out of phase.

[ion] C2 · 05-15-2008, 12:28 PM

Oh I didn't even mention about the tweeter wiring. I didn't hook mine back up.

kniedelm9490 · 05-15-2008, 12:28 PM

they way i saw it was my 6.5 and tweeters were wired togather and then pluged in with a clip. i cut the clip, sodered the old connection and ran it back to a aftermarket amp ill shoot a couple pictures later and see what you think i should do about placement of amps and what not

irondiezl3 · 05-15-2008, 03:02 PM

why would them being connected backwords cause them to crack i thought cracking or clipping was just a power issue? idk tho again my other aftermarket speakers didnt crack or clip.

[ion] C2 · 05-15-2008, 03:04 PM

who said anything about cracking and clipping? the speakers will just move forward when they should be moving backward, should still sound somewhat right

irondiezl3 · 05-15-2008, 03:23 PM

im sorry i have a post in car audio forums and got these mixed up yea i have my colors backwords so they are out of phase and in the car audio forum they are telling me that they are cracking and clipping due to being wired backwords but i have a hard time believing that. here is post.

http://www.caraudio.com/forum/showth...63#post4626763

Ryan from Ohio · 05-15-2008, 07:23 PM

I see common sense evades some still.

Someone almost hit the head on the nail.

What you got here is your replacement speaker is 4 Ohms and you have the factory tweeter wired in also (its a 4 Ohm). So you have the headunit bridged. You cant do that, period.

Your speaker will operate no different in phase or out of phase outside of the phase shift. Anyone who says anything different obviously has no place answering technical questions.

BTW see you on the Alero board!

There are a lot of smart people ont hat board. however there are even mroe idiots that shouldnt be answering questions.

Ryan from Ohio · 05-15-2008, 07:24 PM

Also in the future, provide all the information. Stop posting bits here and there.

Only reason i could figure it out was because of the different info posted on CA.com.

Consider it lesson learned and move forward. now unhook them factory tweets!

irondiezl3 · 05-15-2008, 07:30 PM

finally someone who agrees with me now i got them back to infase and they stopped clipping funny they actually sound worse tho but atleast hooked up right. i always agreed with the tweeter comment myself but ull see if u do a search alot of people posted it was ok to run tweets like that! i always thought the headunit wasnt made for that. so then to my question i always asked and never got a answer for how is it from the factory they have tweeters in there they are run in the same wires as the fronts so why is my car any diferent? and what ohm load does factory radio run at and what ohm load do after market radios run at typically?

pawzbear · 05-16-2008, 03:31 PM

jk delete this post - mistake

irondiezl3 · 05-17-2008, 10:25 AM

plenty of people on this forum that have factory tweeters and aftermarket speakers.

cherrington17 · 05-17-2008, 11:09 AM

i did... but the tweeters didn't sound right, and were just messing with my head, so i took them out.

..and now that i have aftermarket components up front (even though they aren't set up as well as they should be, w/ the angles and whatnot) i guarantee you, that something was a miss w/ the factory tweets and aftermarket woofers.

Ryan from Ohio · 05-17-2008, 06:44 PM

Theres plenty of idiots in the world too... So whats your point?

You have a problem, its been addressed. Yet your going to keep on with it?

Ok since you dont want the correct answer, let me give you some BS. YOu need to buy a line filter. it costs about $60. Go buy it and give it a try.