07-07-2011, 10:41 PM
|
#1
|
OSV coming soon!!!!!
Join Date: Jun 2006
Location: lindsay, ontario
Posts: 2,377
|
Wiring Gauge Overlays...
So I got a set of the speed hut gauge overlays from a member here, and from what I have seen most people just run the wire to the cubby light... I was hoping to put the switch in the little pocket to the left of the steering wheel, and if I go with the cubby light, there is not enough wire to run back that far...
My question: Has anyone wired it directly behind the gauge cluster off the original harness, and if yes, which wires were spliced for it to work? I also believe back there will give me a cleaner look overall...
Any and all help is appreciated
__________________

Misty: 3400, S&S headers, TCE 65mm TB, CAI, 180* TStat, Milzy motor & tranny mount, 18" BOSS 328 & much more... going osv!!
Silver: 2.4L, 5 speed, GAGT seats, front & rear STB's, all red tails, led headlights, Magnaflow muffler, Milzy Motor mount, WAI, Cosmo short shifter; sold n missed
Tequila: 2.4L, GA interior swap, scrapped...
|
|
|
07-07-2011, 10:57 PM
|
#2
|
Premier V.I.P. Member
Join Date: Feb 2009
Location: Oxbow SK
Posts: 1,385
|
what switch are you talking about? the dimmer switch built in?
what i did was turned that dimmer up all the way, tapped into the grey wire for the interior lights, then installed. they will dim off the factory dimmer
__________________
2002 Alero w/ 2.2 ecotec 5 speed
power window conversion, heated leather seats, 16" rims, high & low hids, auto dimming rear mirror, speedbuilt front and rear sway bars, poly bushings all around.
2005 Silverado 2500HD w/ 6.0l Vortec 4L80E
Tuned 6.0l, exhaust, intake, with 450000km on the odometer. Tow Rig
1985 Pontiac Trans Am GTA w/ 5.7 Vortec 700r4
mild vortec 350 with 4 speed auto. performance suspension. factory gold color. project car
|
|
|
07-07-2011, 11:18 PM
|
#3
|
A-mod Pirate
Join Date: Jul 2008
Location: Big Bad Cali
Posts: 3,016
|
cut out the in line dimmer when u wire it to the gray wire on the cluster u you dont need a second dimmer.
|
|
|
07-07-2011, 11:35 PM
|
#4
|
Premier V.I.P. Member
Join Date: Feb 2009
Location: Oxbow SK
Posts: 1,385
|
even better. i just left mine behind the dash
__________________
2002 Alero w/ 2.2 ecotec 5 speed
power window conversion, heated leather seats, 16" rims, high & low hids, auto dimming rear mirror, speedbuilt front and rear sway bars, poly bushings all around.
2005 Silverado 2500HD w/ 6.0l Vortec 4L80E
Tuned 6.0l, exhaust, intake, with 450000km on the odometer. Tow Rig
1985 Pontiac Trans Am GTA w/ 5.7 Vortec 700r4
mild vortec 350 with 4 speed auto. performance suspension. factory gold color. project car
|
|
|
07-08-2011, 11:15 PM
|
#5
|
OSV coming soon!!!!!
Join Date: Jun 2006
Location: lindsay, ontario
Posts: 2,377
|
I was more looking at keeping the switch as it changes it from blue to green, so depending on my mood etc, I can change it up... I see a concensus on the grey wire for the dimmer, what about actual power and ground though?
thanks for the input so far...
__________________

Misty: 3400, S&S headers, TCE 65mm TB, CAI, 180* TStat, Milzy motor & tranny mount, 18" BOSS 328 & much more... going osv!!
Silver: 2.4L, 5 speed, GAGT seats, front & rear STB's, all red tails, led headlights, Magnaflow muffler, Milzy Motor mount, WAI, Cosmo short shifter; sold n missed
Tequila: 2.4L, GA interior swap, scrapped...
|
|
|
07-17-2011, 11:34 PM
|
#6
|
OSV coming soon!!!!!
Join Date: Jun 2006
Location: lindsay, ontario
Posts: 2,377
|
Just a quick update... Apparently I am really bad at wiring... I have tried using the grey wire behind the cluster but they still do not work... There are 2 wires on the gauges, a red wire and a black wire... I am at a complete loss at this, and I know I am probably over thinking this completely and missing the simplicity of it...
Please help!!! Which wires do I use from the factory harness to splice for the power and ground?
__________________

Misty: 3400, S&S headers, TCE 65mm TB, CAI, 180* TStat, Milzy motor & tranny mount, 18" BOSS 328 & much more... going osv!!
Silver: 2.4L, 5 speed, GAGT seats, front & rear STB's, all red tails, led headlights, Magnaflow muffler, Milzy Motor mount, WAI, Cosmo short shifter; sold n missed
Tequila: 2.4L, GA interior swap, scrapped...
|
|
|
07-18-2011, 01:42 AM
|
#7
|
GL Member
Join Date: Jan 2010
Location: Suffolk, Virgina
Posts: 609
|
The Grey wire from the cluster is illumination (12v DC) hook that to the red wire. Then hook the black to any ground.
__________________
01 Alero 2.4 - Just minor mods...
|
|
|
07-18-2011, 06:09 PM
|
#8
|
OSV coming soon!!!!!
Join Date: Jun 2006
Location: lindsay, ontario
Posts: 2,377
|
Cool thanks Phil... I figured I was over thinking!!
EDIT: I finally got around to getting this done... Used the grey cluster wire and the black ground from the trip reset button on the left side of the dash... Works great now  Thanks to all who helped!!
__________________

Misty: 3400, S&S headers, TCE 65mm TB, CAI, 180* TStat, Milzy motor & tranny mount, 18" BOSS 328 & much more... going osv!!
Silver: 2.4L, 5 speed, GAGT seats, front & rear STB's, all red tails, led headlights, Magnaflow muffler, Milzy Motor mount, WAI, Cosmo short shifter; sold n missed
Tequila: 2.4L, GA interior swap, scrapped...
Last edited by tw0123 : 07-19-2011 at 10:55 PM.
|
|
|
07-20-2011, 07:00 PM
|
#9
|
GX Member
Join Date: Jul 2010
Location: Hamilton, Ontario
Posts: 236
|
Great! now you're ready for the alero meet :P.
|
|
|
07-20-2011, 09:54 PM
|
#10
|
OSV coming soon!!!!!
Join Date: Jun 2006
Location: lindsay, ontario
Posts: 2,377
|
Quote:
Originally Posted by Thewolf
Great! now you're ready for the alero meet :P.
|
Almost...
__________________

Misty: 3400, S&S headers, TCE 65mm TB, CAI, 180* TStat, Milzy motor & tranny mount, 18" BOSS 328 & much more... going osv!!
Silver: 2.4L, 5 speed, GAGT seats, front & rear STB's, all red tails, led headlights, Magnaflow muffler, Milzy Motor mount, WAI, Cosmo short shifter; sold n missed
Tequila: 2.4L, GA interior swap, scrapped...
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 07:25 PM.
|