E Brake Boot

01-20-2005, 01:31 PM

Ok ive looked every were i can think of with no luck. I know ive seen an alero with a blue one, were can i find a red one. Any ideas

Naich · 01-20-2005, 01:37 PM

moved to common questions, this isn't a product review

Redog · 01-20-2005, 04:41 PM

juje racing Look under GA

2fst4u · 03-02-2005, 12:10 PM

at first glance, your boots look ok, but they really don't even fit. why would you use these? you should at least hem the edges or something. clean them up, man.

03-02-2005, 05:07 PM

Hey, I think they look good. Don't let some newb with only four posts tell you otherwise.

03-02-2005, 05:15 PM

Poor noob will prolly never post again now.

b-spot · 03-02-2005, 05:15 PM

Well since I have more posts and that somehow makes a difference, they do infact look like crap. You can get red ones from MOMO that are of WAY better quality.

MOMO ebreak boot: (soo much better than the factory as you can tell by comparing it to the shift boot)

03-03-2005, 01:46 AM

I still think they look good and don't let some post whore tell you otherwise! :P
j/k! They might look a little better if they were stitched to fit below the shift knob and e-brake handle, but they are still not bad at all.

Schimmel03 · 03-03-2005, 02:04 AM

I think redog's boots look good. Granted the top of the shifter looks a little split, but they fit nicely and just plain look nice.

forbidden · 03-04-2005, 04:45 PM

I have to agree they dont look good at all... looks like you made them and cut them wrong... not even close..

Redog · 03-04-2005, 10:27 PM

hmph, it seems that there is a lot of different views on my boots.

No I didn't make them myself and I turned the tranny boot around, and had my g/f sew it up.

For those that like it, :thumbsup:

forbidden · 03-04-2005, 11:03 PM

Quote:

Originally posted by Redog@Mar 4 2005, 10:27 PM
hmph, it seems that there is a lot of different views on my boots.

No I didn't make them myself and I turned the tranny boot around, and had my g/f sew it up.

For those that like it, :thumbsup:

I like the look but I wish it would have fit a little better...

sound_xtreme · 03-05-2005, 01:12 AM

Quote:

Originally posted by b-spot@Mar 2 2005, 05:15 PM
Well since I have more posts and that somehow makes a difference, they do infact look like crap. You can get red ones from MOMO that are of WAY better quality.

MOMO ebreak boot: (soo much better than the factory as you can tell by comparing it to the shift boot)

woah, thats the biggest ebrake handler ever...

03-05-2005, 07:11 AM

^^^Not to mention how much all of that costs. I'm a budget shopper. I'd much rather put something like an APC shift knob and boot on my car, as long as it looks good. Hey Reddog, how did you attach the boot to the bottom of the console?

exnine@gmail.com · 02-16-2006, 09:18 PM

I just put in my Shifter knob / boot. I "borrowed" this guy's Idea. I got the same knob that he has, I just have a different boot. Pic quality is pretty bad. I took it with my phone.

Rubered00 · 02-21-2006, 08:55 PM

Quote:

Originally posted by exnine@gmail.com@Feb 16 2006, 08:18 PM
I just put in my Shifter knob / boot. I "borrowed" this guy's Idea. I got the same knob that he has, I just have a different boot. Pic quality is pretty bad. I took it with my phone.

Quoted post

Where is the button at on that knob??? Top center? or does the whole thing push down?

exnine@gmail.com · 02-22-2006, 01:28 AM

Quote:

Originally posted by Rubered00+Feb 21 2006, 08:55 PM--><div class='quotetop'>QUOTE(Rubered00 @ Feb 21 2006, 08:55 PM)</div><div class='quotemain'><!--QuoteBegin-exnine@gmail.com@Feb 16 2006, 08:18 PM
I just put in my Shifter knob / boot. I "borrowed" this guy's Idea. I got the same knob that he has, I just have a different boot. Pic quality is pretty bad. I took it with my phone.

Quoted post

Where is the button at on that knob??? Top center? or does the whole thing push down?

Quoted post

[/b][/quote]
The whole thing just pushes down. It takes a minute to figure out the correct order of the pieces. And it has to be mounted In the right area, or else it will stay pushed down. and you can't get your key out of the ignition. But after you have it. I think it looks alot nicer than that ugly looking hammer headed thing.

Rubered00 · 02-22-2006, 11:57 AM

[/quote]
The whole thing just pushes down. It takes a minute to figure out the correct order of the pieces. And it has to be mounted In the right area, or else it will stay pushed down. and you can't get your key out of the ignition. But after you have it. I think it looks alot nicer than that ugly looking hammer headed thing.

Quoted post

[/quote]

So is this actually considered a manual shift knob that you have made work for the auto????

Redog · 02-16-2006, 09:20 PM

I just took mine out, still got the e-break

El Pablo · 03-13-2006, 07:15 AM

yeah my next goal is to find the manual plastic piece and put that in, so it truly looks like a manual until someone sees only two pedals and goes "what a dork"

question, anyone know where to get a good e brake boot? Probaly been asked a million times.