Ok. I didn't know if i should start a new thread in an other category for this, but here we go.
I bought the car with a "supposed" bent rod. Well it revs to 3500 then stalls with no shaking really. I figure fuel. It also can't have any load or its bogs, then stalls. Just changed fuel filter of which i could barely blow through, but didn't fix the problem. I'll do a pump next, but that's the odd thing. My pressure reads 59 at the rail, at idle about 51, then 59 whilst being revved up. By the book, i would assume the pump is good being that i'm told it should be 59. Did the FPR suck test and that seems good. 150,000 miles on the car.Previous owner knew NOTHING about cars, and it had almost no oil when i picked it up. I assumed main bearings until i put oil in it and it ran smooth, with no ticks.
I'm pretty handy, but diagnosing newer cars is a bit over my head.(electronics/sensors)
|