11-01-2006, 09:48 PM
|
#1
|
|
GX Member
Join Date: Jul 2005
Location: Winnipeg, MB, CA
Posts: 39
|
Soft brake pedal
It started today, on my way to work my brake pedal felt fine. But when I left work in the afternoon my pedal feels soft. It almost goes all the way to the floor now. The brakes still work but I need to brake way ahead. My fluid was a little below max and I topped it off, and I checked my parking spot and didn't find any spots on the ground that looked like leaking fluid. Has anyone else had this problem, if so what was it? Any sugestions would be great.
|
|
|
|
11-01-2006, 11:09 PM
|
#2
|
|
Trying to get it together
Join Date: Aug 2006
Location: somewhere
Posts: 617
|
Brake master cylinder probably has an internal leak.
|
|
|
|
|
11-01-2006, 11:51 PM
|
#3
|
|
3500 DONE!
Join Date: Apr 2006
Location: Albany, NY
Posts: 5,915
|
DUDE i had the same problem in my taurus, and it was because i left my E BRAKE on, i eventually noticed it and i pulled it out, and everything went back to normal. Make sure thats not itlol
__________________
2002 3400 & 3500 GL "Ruby"-->R.I.P. 163k. My first car. Put 130k on her.
2000 3500 GLS "Robin"-->Intake,Headers,Exhaust,H&R springs,KYB AGX,Sway bars,Strut bars and more 
|
|
|
|
|
11-02-2006, 07:46 AM
|
#4
|
|
I Love Tiara!
Join Date: Nov 2003
Location: Oldsmobile, IL.
Posts: 1,858
|
when was the last time you changed your brake pads? sometimes it's just common problems well not as common as billy's but....
do you hear anything when you brake?
__________________
|
|
|
|
|
11-02-2006, 08:22 AM
|
#5
|
|
GX Member
Join Date: Jul 2005
Location: Winnipeg, MB, CA
Posts: 39
|
I don't hear anything when I brake. No sqweaking. I'm kinda thinking it's the master cylinder also. Plus I haven't used my e-brake at all and the handle is all the way down.
|
|
|
|
|
11-02-2006, 10:00 AM
|
#6
|
|
3500 DONE!
Join Date: Apr 2006
Location: Albany, NY
Posts: 5,915
|
O ok, well i just figured i would tell you my stupid story in case u did the same thinglol but nobodys as stupid as me on here 
__________________
2002 3400 & 3500 GL "Ruby"-->R.I.P. 163k. My first car. Put 130k on her.
2000 3500 GLS "Robin"-->Intake,Headers,Exhaust,H&R springs,KYB AGX,Sway bars,Strut bars and more
|
|
|
|
|
11-02-2006, 10:22 AM
|
#7
|
|
Let's Play Army!
Join Date: Nov 2003
Location: Lockport, NY
Posts: 8,475
|
whatever it is, you definitely lost pressure somehow. check to make sure the e-brake is fully disengaged. Then check for any leaks/puddles under the car (could be a leak in the master cylinder, or the brake lines MIGHT have a small hole from corrosion). Then check the condition of the pads.
if it's not any of those, you have a serious problem.
__________________
Quote:
Originally Posted by black
holy crap, i just farted at work and the whole office stinks!!!!
|
RIP to my Alero @ 112000 miles. COD: thrown rod. TOD: 430pm, Dec19, 2011.
|
|
|
|
|
11-03-2006, 01:44 AM
|
#8
|
|
It's Shake 'n' Bake Time
Join Date: Apr 2006
Location: Fort Mac Attack
Posts: 85
|
Usually with a soft pedal its the second, I think, Seal in the master cylinder. If it stops and then slowly sinks thats pretty much the cause. If it goes almost to the floor, but slows the car down alittle. It might also be air in the brake lines. Cause if its just air in the lines, its pretty easy to bleed out.
|
|
|
|
|
11-03-2006, 02:40 AM
|
#9
|
|
Aleromod part owner
Join Date: Nov 2003
Location: Far Northeast Philadelphia, PA
Posts: 18,199
|
Clean the inside of your wheels a bit, and pump the brakes. If you have a leak around the caliper, that's where it's going to drip.
That's what happened to mine
__________________
33% ALEROMOD OWNER!!
2000 Olds Alero 3400 SFI 14.53 @ 94.93
1985 Olds Delta 88 307 SBO 17.96 @ 76.99
2007 Volvo V50 T5 6M 15.782 @ 89.12
www.facebook.com/kb0177
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 12:30 PM.
|
