tsx projectors coming soon...

[sleepyalero]

Here in a couple weeks ill be ordering tsx projectors and d2s hids and will make a set of projector headlights.

I'm going to do cms1 myself and found a way to make an even cut off so the light doesn't flare up at cut off. (They are common for that) I'm not really worried about the flare though so we will see.

Hopefully I can knock this project out pretty quick. Just gotta figure out how I'm going to do it. And I will take pictures of my work and make a how-to for everyone since no one has yet.

Wish me luck! If you have any opinions on how I should go about doing it that would be great.

[XanderWiFi]

Sounds pretty cool. Good luck.

[sleepyalero]

Thanks man appreciate it. Hope it all goes well.

[cavaliers60]

Here's an opinion. Don't screw it up!

Good luck on them. Can't wait to see how it turns out!

[Chris2000]

I'll wait for the finished product.

[cherrington17]

we're going to need "in progress" pics.

[jhubbz]

how much for the projectors? also im really excited for this build i might attempt it one day

[falloutboy]

Dont know if I already showed u this link http://www.nastyz28.com/

He is doing the same as u - only to a 7" round housing.
Perhaps you two should talk about this work.

[sleepyalero]

Originally Posted by cavaliers60

Here's an opinion. Don't screw it up!

Good luck on them. Can't wait to see how it turns out!

hahahaha thanks i'll try not to i cant wait either. doesnt look like it will be to hard.. just cut and mount really..

Originally Posted by Chris2000

I'll wait for the finished product.

Originally Posted by cherrington17

we're going to need "in progress" pics.

i will do progress pics in this thread. and then make another thread when done for a how-to.

Originally Posted by jhubbz

how much for the projectors? also im really excited for this build i might attempt it one day

right now i found some for 215 with the clear lenses. still looking around for more to see if i can find cheaper.. if not then oh well it will be worth every penny to me.

Originally Posted by falloutboy

Dont know if I already showed u this link http://www.nastyz28.com/

He is doing the same as u - only to a 7" round housing.
Perhaps you two should talk about this work.

no you haven't. very interesting. i do like it and hes doing a good job on them.



***i'm PRETTY SURE I will be ordering the tsx projectors and clear lenses, shrouds, and d2s bulbs this coming up week. and will get started on the project in my free time.***

i work during the day and got like 7 hours of free time to do whatever depending on how late i stay up.

i can't wait to knock this project out! might be alot of stress or alot of fun. soon i will know...

also i appreciate all the feedback guys!

[cherrington17]

I'm intrigued to see how you'll retain the adjustments....

I've seen it done, but others tend to just skip it all together.

[falloutboy]

Originally Posted by cherrington17

I'm intrigued to see how you'll retain the adjustments....

I've seen it done, but others tend to just skip it all together.

DONT SKIP IT

The guy in the Camaro Forum also had a posting where he talked about the different option to run with - and described their pros and cons.

Have to look if I can find it. IF you want.

[sleepyalero]

cherry - retain the adjustments to what?

falloutboy - that would be great!

[cavaliers60]

I wouldn't mind trying to put those HID projectors that move.... I saw a Buick with projector lenses... The guy started the car and the lights moved! (those ones that move to help you see the turns better)

http://www.youtube.com/watch?v=maiHmKKotMo

[cherrington17]

Originally Posted by sleepyalero

cherry - retain the adjustments to what?

To adjust the beam... some people go with fixed mounts after they install.. which is just dumb.

Originally Posted by cavaliers60

I wouldn't mind trying to put those HID projectors that move.... I saw a Buick with projector lenses... The guy started the car and the lights moved! (those ones that move to help you see the turns better)

http://www.youtube.com/watch?v=maiHmKKotMo

I too, would love this... BUT.. you'd have to have a MUCH more complicated install to get it done.

[sleepyalero]

cherry from what i understand there are 2 screws on the back of the projector to adjust them right? thats just what i read.. im not sure though.

also im kinda stuck... before i order anything how will i convert 9006 to a d2s bulb?

if you know what i need to get please post a link to it.

[falloutboy]

Originally Posted by sleepyalero

before i order anything how will i convert 9006 to a d2s bulb?

In my understanding - Nothing.
U stuck the D2S into the new projector and lock it - thats it. Like in the OEM ones.

If you look closely at the current headlights, u lock the 9006 (or H7) as in European models into the mirror part and cause your getting rid of the mirror and use projectors you need to fasten them to the housing.

Perhaps a long phone call with the guys at resto*something* is necessary to know what u really need and WHY.

[sleepyalero]

Retrofit source? Haha and well the 9006 bulb locks in but also it has a plug that plugs into where a stock bulb would go.

Pull off rubber housing on back of headlight and there is a plug to the bulb. I don't think a d2s bulb would plug into That?

[cherrington17]

I think your going to just splice the wires. I'd look into that more though.

Look up the guys who have done projector retrofits on the site, and message them.

[Chris2000]

all i have to say after reading the op's comments in this is good luck but unless you prove me wrong im 100% sure you're wasting your money on a project you won't accomplish.

now get mad and prove me wrong.

[sleepyalero]

i will have to look more into that cherry.

chris - i looked through the threads on here. all i really saw was is that getting the adjustment right is the hardest part. once your done with that. work on the finished bezel and stuff.

im going to talk to the retrofit source tho and see what they can tell me about the d2s working with a 9006 plug.