Rear neon placement

ok.... i need a picture of where you guys put ur rear neons (underbodies)... i think i have to make L brackets in order for them to fit right... but if anyone has a pic of how they did it, that would be great.... thank you
-Chris

I dont have a pic, but what I did was used some thin wire and just put the neon light on top of that metal object that sticks in from the bumper, its directly above the muffler, and I just tied that wire together, although the stock exhaust blocks some light on the drivers side, I plan to fix that when I get an aftermarket exhaust, and suprisingly with how far up it is, it still has very good lighting and all, and with this setup I dont have to worry bout heat damaging the neon tube or anything.....if you wanna know how i ran the wire, lmk

I did what wy3414 did at first, but after it being like that it bugged me that the install was half ass so what i did was drill the holes in the metal and because i couldnt find a screw that wouldnt strip so i put plugs in and screwed into those and it holds up really good, no worrys about it at all.......

How did you run the wire? thanks

here's pics.....hopefully they help (copy/paste link)
http://www.geocities.com/glowin02alero/neons.html

different ways to run it, inside the covering of a rear tire deflector then you can go into the side skirts or zip tie to a side neon of you have one, then run it with the side all the way to your power

Originally posted by 1WhiteOSV@May 10 2004, 04:04 PM
here's pics.....hopefully they help (copy/paste link)
http://www.geocities.com/glowin02alero/neons.html

b-e-a-utiful! thank you, that is exactly what i needed

well i mounted it with brackets, sorta how ^^^ did on his website, but i ran the wire with the brake line (zip ties), will that be a problem, i don't see anything that it could get caught in or anything...

[ptrudel]

that's what i did, and the wires were ok...as for the tube tho, that's another story...