07-22-2005, 11:42 PM
|
#1
|
Aleromod part owner
Join Date: Nov 2003
Location: Far Northeast Philadelphia, PA
Posts: 18,199
|
I was talking to my mech about 2 weeks ago and pointed out the pealing dash to him. It's really starting to get bad, in fact the dash is peeling so much that it's curling up and I can see black under the dash pad
Now this is a $766 part at the dealer (new dash price) but he said I could either get the leather for the dash or get a new dash and he would install it and reglue the old and the new dash too. But the old dash is peeled so much, it might not be fixable. The tan dashes are very hard to find around here.
I stop at a junkyard on the way home and they have 5 1999 Aleros there and 2 of then have the tan interior.
The first one hit a tree, the windshiled all smashed to poop, and the dash was black from all the dust from the yard. But the dash was in pretty good shape, a few dings in the dash. The 2nd one the car was up on a rack, so I climbed up and got in the car. This one didn't look totaled. The dash was in very good shape. I did feel a bit of raised part like mine started to do, but it's getting reglued anyway.
I ordered it and the cost is $275. I don't pay until I pick it up. I probably won't have the cash to install it for about a month or so, but I figured get it now, while I can. The second Alero I looked at had a lot of nice parts on it, if anybody is interseted.
__________________
33% ALEROMOD OWNER!!
2000 Olds Alero 3400 SFI 14.53 @ 94.93
1985 Olds Delta 88 307 SBO 17.96 @ 76.99
2007 Volvo V50 T5 6M 15.782 @ 89.12
www.facebook.com/kb0177
|
|
|
07-23-2005, 02:05 AM
|
#2
|
V.I.P. Member
Join Date: Nov 2003
Location: Plano, Tx (dallas)
Posts: 1,643
|
Can you get some parts for me? Like plastic trim, weatherstriping.etc? I'll paypal ya the money. Hit me on AIM = aftermathrooster, if ya use AIM or PM works.
__________________
I dont have an alero no more...
|
|
|
07-23-2005, 09:08 AM
|
#3
|
|
Hit me up on AIM ritche with what ya need. Theres a nice junk yard within 10miles of me, and my dad knows a somewhat local guy who deals with all the newer cars, Ill be getting a new decklid in the near futre so if ya need somethin holla.
|
|
|
08-19-2005, 12:02 PM
|
#4
|
|
Mine is doing the same thing and i KNow its very common, but what if i just took off the dash, and reglued it back down??
|
|
|
08-19-2005, 12:23 PM
|
#5
|
|
My grey dash is also peeling. The vinyl is in fine condition, so I would like to avoid pulling the dash out. Has anyone attempted to fix this by stretching and reglueing?
|
|
|
08-19-2005, 01:00 PM
|
#6
|
GX Member
Join Date: Apr 2004
Location: MN
Posts: 181
|
if anyone could tell me the price of some new door panels (both sides) for a gls coupe i would probably want them....
shipping might be a bitch though...
|
|
|
08-19-2005, 04:08 PM
|
#7
|
|
lol, nice timing, let me know how much itd cost to get the middle air vent sent to me, I broke ine while pulling it out, i will need it with the two clips on the bottom if thats possible let me know, thanks in advance
|
|
|
08-19-2005, 04:33 PM
|
#8
|
V.I.P. Member
Join Date: Nov 2003
Location: Plano, Tx (dallas)
Posts: 1,643
|
Quote:
Originally posted by UnoWHO@Aug 19 2005, 08:08 PM
lol, nice timing, let me know how much itd cost to get the middle air vent sent to me, I broke ine while pulling it out, i will need it with the two clips on the bottom if thats possible let me know, thanks in advance
|
for that one i find it best to take out radio. then go from underneath and push on clips to release.
__________________
I dont have an alero no more...
|
|
|
08-19-2005, 05:09 PM
|
#9
|
Aleromod part owner
Join Date: Nov 2003
Location: Far Northeast Philadelphia, PA
Posts: 18,199
|
OK I didn't get the dash, why, the ahoes at the junkyard stiffed me.
They never called me to tell me the part was ready, so I called them, a week after the part was supposed to be ready, and they said it wasn't. At this point I just said OK I don't want it (It was still in the wrecked car!!!)
They said fine and hung up, but I get a nice surprise on my credit card bill, a $291.50 surprise, so I call them up ASAP and the guy gives me attitude and I said that I cancled the order. He siad that he called me and I said he didn't and that I called them. He spouts off my phone number, which wasn't mine, hell not even close, and I said that's not my number, he said it was. I said if you called the right number, I would have the dash right now.
Anyway, he hits me with a 25% restocking fee, and I tell him I'm not apying it becuase it wasn't my fault you got the wrong number. He said I was paying. Instead of going back and forth (I was at work) I called Visa and disputed the charge.
That's where I am right now. I bought a carpet dash cover on ebay for $17, so I'm going to see how that works first. The dash is ruined anyway, velcro strips aren't going to make it worse. :rolleyes:
__________________
33% ALEROMOD OWNER!!
2000 Olds Alero 3400 SFI 14.53 @ 94.93
1985 Olds Delta 88 307 SBO 17.96 @ 76.99
2007 Volvo V50 T5 6M 15.782 @ 89.12
www.facebook.com/kb0177
|
|
|
08-20-2005, 06:58 AM
|
#10
|
Let's Play Army!
Join Date: Nov 2003
Location: Lockport, NY
Posts: 8,475
|
Lesson to be learned here:
1) NEVER tell people at a junkyard your credit card number. And if you have to tell them a phone number, tell them a cell phone number. It's much harder to gain access to personal information through a cell number.
2) Ask for a price on parts before they see any of your cash. In fact, make a point of it to make 2 trips. the first trip with no cash at all, and the second to buy the pieces you need. (I don't know about PA, but in NY, it is illegal to charge more than the quoted price...except if a considerably long amount of time has passed...like over a month. I'm not sure on the specifics of that...)
__________________
Quote:
Originally Posted by black
holy crap, i just farted at work and the whole office stinks!!!!
|
RIP to my Alero @ 112000 miles. COD: thrown rod. TOD: 430pm, Dec19, 2011.
|
|
|
08-20-2005, 11:34 AM
|
#11
|
GLS member
Join Date: Nov 2003
Location: Fairfax, VA
Posts: 3,505
|
291.50????? my god. i got mine for 50 bucks, with gauges, vents, hvac, and radio trim.
|
|
|
08-20-2005, 03:32 PM
|
#12
|
[boosted 2.4L]
Join Date: Dec 2004
Location: Central PA
Posts: 1,537
|
someone asked earlier about stretching and regluing. i did it this week to my dash by the windshield. it was real easy. if you want help shoot me a pm
and also, where did you get a dash for 50 bux. hook me up
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 09:16 PM.
|