Upgrading Wiring Headlight Harness

Justy311 · 10-04-2005, 01:19 PM

I was talking about this in my Eurodezigns Headlights topic, but figured this might get more attention. Has anyone upgraded their headlight harness to a higher guage. I am thinking about doing this, but want some feedback on difficulity and whatnot. Will I have to take the light apart or can I do it without? Thanks everyone

Justy311 · 10-10-2005, 02:19 PM

first, why hasn't anyone replyed? oh well. I found these on ebay and wondering if people think they will work. Any ideas?

Thanks

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...mMakeTrack=true

jabartram · 10-10-2005, 04:35 PM

Yes, i did, but i assembled my own with 14 guage wire, i'm running 80 watt streetglow lo-beams, and 100 watt streetglow hi-beams.

the factory wiring is 20 guage.

14alero · 10-10-2005, 04:36 PM

It should work just splice the old connector off and crimp the new one on i had aftermarket bulbs and it melted my connectors so i had to replace them its not thast hard taking the bulb out either

Justy311 · 10-10-2005, 04:39 PM

If I do this, im going all out, higher guage wiring for the entire light, so the link from ebay would be the entire set. I appreciate the help finally. Thanks

jabartram · 10-10-2005, 04:41 PM

Check this thread.