PDA

View Full Version : Lights In Door Handles And Mirrors?


Lovestheh20
04-24-2006, 10:45 PM
I was thinking it would be pretty cool to put some amber/yellow LEDs under the exerior door handles (as shown on streetglow's website) and also throw a few in series on the mirrors so they work with the turn signal indicators. think it would be a pita to wire up?

I don't like flashy stuff, but I thought it would be subtle and unique at the same time.

cherrington17
04-25-2006, 12:34 AM
message cyberknight about the mirror one. i think he did his...

and for the handles, i've looked into this. i'd say its possible, but w/ how little room we have in our handles, i think you'd feel it in there. there is enough room to barely fit 2 small wires in there for the LED (you'd only need one) just sand the side and tip down so it spreads more down and outward. I thought about doing mine, but didn't want to tear apart my door that badly.

Lovestheh20
04-25-2006, 11:49 AM
https://www.streetglow.com/cgi-local/shop.p...age=sgledst.htm (https://www.streetglow.com/cgi-local/shop.pl/SID=114600515024981/adcode=/page=sgledst.htm)

think these would work better cherr?

2fst4u
04-25-2006, 11:50 AM
i think those would be the way to go, as long as the glue on the back of them holds after being touched all the time.

-Alero-
04-25-2006, 02:21 PM
shave your handles!

Lovestheh20
04-25-2006, 05:35 PM
no thanks! my car isn't worth it.

Satsuriku
04-25-2006, 05:50 PM
ya im not too big of fan of the shaved dorr handles myself.

i would love to put a couple of LED's behind the side mirrors, i think it would give it a really sweet look but of course, its illegal and i would get nailed within seconds of turning them on.....arrg! damn cops

Lovestheh20
04-25-2006, 07:48 PM
illegal to have amber colors in the mirrors? really? so the trucks and stuff that came standard w/ the turn signal mirrors in the us dont come equipped in canada?

whiteliquid
04-25-2006, 07:59 PM
Not illegal in the states to have leds in your mirrors.....as long as they arent blue or red.

I had them inside my mirrors for a while, they were behind the glass part and litup the whole inside I couldnt tell you how to do it because i payed a custom shop to do it for around 100$'s But it looked great so I say go for it :thumb:

Sux that i dont have them anymore, I got some dual post mirrors a few days ago for 40$'s (junkyard)

Cyber Knight
04-25-2006, 08:04 PM
Mine are 4 inch neon tubes in the mirrors (blue), but they aren't wired to the turn signals, they're on when I turn on my interior neon. I've had them for a couple of years and the cops have never had a problem with them. The gap around the mirror is so small, it's a very subtle look, but uber slick. Follow my website link for pics. It's a 2 hour install at most.

Menace
04-25-2006, 08:19 PM
"I like mine shaved" :) shaved is the cleaner and cooler look

_01Alero_
04-25-2006, 08:35 PM
About how much did the shaved door handles cost you? I've been looking into it, but I dont know how much it would cost to do it.

2fst4u
04-26-2006, 02:45 PM
gr1m has leds in his door handles. if you have questions, check his out.

for shaved, talk to fantomforcecustoms02. he's got all 4 of his shaved.

Satsuriku
04-26-2006, 03:04 PM
Originally posted by Lovestheh20@Apr 25 2006, 05:48 PM
illegal to have amber colors in the mirrors? really? so the trucks and stuff that came standard w/ the turn signal mirrors in the us dont come equipped in canada?
Quoted post


i HATE the look of amber, i was thinking about putting blue led's behind the mirror. i think cyber is right though, i think the gap is too small to really notice unless your close. so right on.....i got me a new project with LED's ^_^

sofa
04-26-2006, 03:33 PM
i bought arrow shaped blur led's from canadian tire but im bring them bak there gay inless there nside the mirror

Satsuriku
04-26-2006, 03:35 PM
Originally posted by sofa@Apr 26 2006, 01:33 PM
i bought arrow shaped blur led's from canadian tire but im bring them bak there gay inless there nside the mirror
Quoted post


hell your better off getting some LED's from oznium and rigging it yourself, plus there much brighter anyways, just gotta make sure you have it air tight when you wire it so they dont short out when they get wet (especially when you wash your car)

Lovestheh20
04-26-2006, 05:29 PM
amber is cool with me :) keeps me outta trouble.

Cyber Knight
04-26-2006, 09:23 PM
One word of warning, I don't know if it's the same for power mirrors or other years (but I'm pretty sure it is) but there is no way to remove the driver's side mirror to work inside the housing. You can't buy parts for it from GM, if any part breaks you have to replace the entire unit. So you might find yourself sawing/breaking the mirror off and then gluing it back together when you're done. The passenger side mirror just pulls off.

Lovestheh20
04-26-2006, 11:38 PM
Originally posted by Cyber Knight@Apr 26 2006, 07:23 PM
One word of warning, I don't know if it's the same for power mirrors or other years (but I'm pretty sure it is) but there is no way to remove the driver's side mirror to work inside the housing. You can't buy parts for it from GM, if any part breaks you have to replace the entire unit. So you might find yourself sawing/breaking the mirror off and then gluing it back together when you're done. The passenger side mirror just pulls off.
Quoted post


thanks for that heads up..