Log in

View Full Version : Wiring Diagrams


sound_xtreme
05-22-2006, 09:25 PM
For alarms:
[attachmentid=10520]
[attachmentid=10521]

sound_xtreme
05-22-2006, 09:28 PM
Radio:
[attachmentid=10522]

sound_xtreme
05-22-2006, 09:34 PM
Another radio:
[attachmentid=10523]

Oldsman
05-22-2006, 09:45 PM
Joel i am going to sticky this.

sound_xtreme
05-22-2006, 10:12 PM
thats why i posted it so it could get stickied :P

sound_xtreme
05-23-2006, 01:53 AM
Easier dome light hook up:
[attachmentid=10526]
the black/red wire will be positive if your alarm trigger is negative, or negative if the trigger is positive.

sound_xtreme
05-27-2006, 12:55 PM
for the parking lights i used the dark brown wire under the column cover on the connector on the light switch. it takes a positive pulse, i think all alarms/kes come with a fused positive parking light wire so you should be able to tap right into it.

sound_xtreme
05-27-2006, 01:31 PM
trunk release i used the black/white wire coming from the drivers side door at the kick panel. it needs a negative pulse or a grounded relay.

Orion
05-30-2006, 01:36 PM
Do you happen to know what color the O2 wire is, that is behind the engine. For attaching the A/F Ratio Gauge

sound_xtreme
05-30-2006, 05:06 PM
i think it's purple, i just tapped in at the sensor.

cherrington17
05-30-2006, 05:09 PM
i've been hunting for a wire that will turn on the dome light, when the door opens, and off, after several seconds...

i've found one that turns on, when the door opens, but stays on. Another that turns on, when the door closes... (both in the purple bundle under the driver's side floor panel)

any ideas?

sound_xtreme
05-30-2006, 05:51 PM
you could use the door sensors in one of the doors.

sound_xtreme
05-30-2006, 05:58 PM
or u could use a decent sized capacitor. it'd give that "fade" effect. or u can use a 555 timer i think.

cherrington17
05-30-2006, 09:08 PM
i tried testing the door sensors...

maybe i was testing it wrong, but it didn't seem to have what i needed, on one wire. i believe its a combination of wires, running to something...

sound_xtreme
05-30-2006, 09:27 PM
you are correct about the sensor. you need to touch the 2 wires together. use a relay to do that

lonnie
11-07-2007, 02:00 PM
We need to update this sticky

[ion] C2
12-14-2007, 11:29 AM
x2 i'm installing mine this weekend

this site looks good: http://64.85.6.118/diagrams/diagrams.asp

sound_xtreme
12-15-2007, 02:03 PM
lol attachments disappeared

cherrington17
02-10-2008, 02:16 PM
Got You guys covered. Heres your new wiring diagrams,straight from da haynes.

http://s178.photobucket.com/albums/w246/cherrington17/Wiring%20Diagrams/

zoL
06-06-2010, 02:24 PM
Got You guys covered. Heres your new wiring diagrams,straight from da haynes.

http://s178.photobucket.com/albums/w246/cherrington17/Wiring%20Diagrams/

Thank you very much.

jhubbz
11-09-2011, 10:54 PM
Uploaded a bunch of diagrams in accordance to a 2001 LD9 (http://www.flickr.com/photos/62898226@N04/sets/72157628094546634/)

I can get more up later.