i want 2 bridge my amp

[lilfee504]

im runnin 2 memphis 10s with a sony explode amp 1200w, 500rms unbridged. now im thinkin about bridging the amp 2 see how much power i will get but i read around that bridging can blow the amp...so i mean should i or should i not?

[white04alero]

lose the sony amp-they suck

[crazyalero]

x2!!!!!get rockfordfosgate

[whiteliquid]

fosgate is good...but just do yourself a favor and go get a power acoustik goth series amp

And as for your ? you can do it....

[SweetNLow]

im runnin 2 memphis 10s with a sony explode amp 1200w, 500rms unbridged. now im thinkin about bridging the amp 2 see how much power i will get but i read around that bridging can blow the amp...so i mean should i or should i not?

totally

[Ryan from Ohio]

Whats the model number?

Are you sure its not a mono amp? If it is, you cant bridge it. You can drop your impedance by varying the Ohm load, but thats done with your subs wiring.

Need sub info also. Memphis makes a few 10" subs, and Sony has made many 1200 amps...

[white04alero]

get a new amp take the sony back to wal mart

[number1alero]

fosgate is good...but just do yourself a favor and go get a power acoustik goth series amp

And as for your ? you can do it....

x2...i also have a goth series power acoustik amp, and ive got it hooked up to a couple 800watt/400rms Kicker CompCVR's and i think ive blown one of the subs from the amp having too much power...despite it being matched up perfectly power rating wise (720watt rms/1channel @ 4 ohms) i really believe they are underrated

[lilfee504]

get a new amp take the sony back to wal mart

ha ha ha. i got it from best buy 3 years ago...didnt kno 2 much about radios and sounds back then...so i just grabbed it becuz it came with 2 10in duals((threw them away since they were flooded out))

[sound_xtreme]

rofl at the power acoustik goth people. IF ur gonna get power acoustik get the 3000D, settle for nothing less.

[lilfee504]

Whats the model number?

Are you sure its not a mono amp? If it is, you cant bridge it. You can drop your impedance by varying the Ohm load, but thats done with your subs wiring.

Need sub info also. Memphis makes a few 10" subs, and Sony has made many 1200 amps...


sony model number --- XM2200GTX 1200w
600 watts x 2 channels max
200 watts RMS x 2 @ 4 ohms
250 watts RMS x 2 @ 2 ohms
500 watts RMS x 1 @ 4 ohm
low-pass crossover (50-300 Hz, 12 dB/octave)
variable bass boost (0-10 dB at 40 Hz)
Tri-way capable
15-3/4"W x 2-3/16"H x 10-7/8"D
stereo 2 channel or bridged mono output
4-ohm stable when bridged
Tri-way capable
MOSfET power supply
preamp and speaker level inputs
preamp outputs
gold-plated connectors

memphis info----RMS/Peak (W)- 250/450
model number---15-PR104D
Dual 4-Ohm subwoofer

[sound_xtreme]

ya bridge it. wire to 2 ohms each(parallel)(pos to pos, neg to neg), then wire the 2 teminals on the box in series(pos to neg on the box).