Trailer Light Wiring

[Silver SLP]

Just got a new Curt hitch installed. Now I just need to wire the trailer lights...

I know on the adapter that Left Turn is Yellow, Right Turn is Green, Tails are Brown and the ground is white.

So my question is, what do those colored wires go to on the stock tail light harnesses? I don't have a test light tool available at the moment...

Thanks!

[Redog]

Can't find the wiring diagram on the net, but I do have a wiring diagram at home, I can tell you later (at work now)

I too have the trailing wiring, but I forget which is which, but I do remember I put the little box under the left taillight and I rigged a zip tie like a loop to hang the wiring plug up and out of sight. Did that on the Delta too :D

[jawa]

i attached my plug to the hitch itself, nice n clean and out of the way, had to run it through a gromit in the trunk, ill get a pic when i go get the alero

[Silver SLP]

Can't find the wiring diagram on the net, but I do have a wiring diagram at home, I can tell you later (at work now)

I too have the trailing wiring, but I forget which is which, but I do remember I put the little box under the left taillight and I rigged a zip tie like a loop to hang the wiring plug up and out of sight. Did that on the Delta too :D

Much appreciated!!

[Redog]

Left: Light Blue/Black

Right: Dark Blue

Stop/Tail: Brown

ground: Black or to Body / chassis

[Silver SLP]

Left: Light Blue/Black

Right: Dark Blue

Stop/Tail: Brown

ground: Black or to Body / chassis


Thanks a lot I'll wire it up tomorrow after work!

EDIT: I also had to wire the 'red' lead from the new harness to the 'light blue' wire on the car. (No black stripe and also on drivers side.)
Red is for brake lights.