Gauges Quit Working Need Some Help Please???

[jamie04dolphins]

I recently tried to install my indiglo gauges in my 1999 Oldsmobile alero. The gauges would glow but then something happened and my real gauges quit working. My needles stay on zero and do not move and my odometer doesn't light up anymore. My blinkers still work and everything still lights up so I was just wondering if anyone has any clue what could have happened and how to fix it??? Thank you so much!

[AftermathAlero]

You prolly blew a fuse. Check the left side fuse panel. if all the fuses are still good. then goto the right side fuse panel and check the CRUISE fuse. its a 10amp. When I pulled out my cruise control.. I pulled the fuse out and its tied into the gauge cluster too. So check those fuses. If still don't work.. post back.

if you put in a new fuse and it blow again, then you hooked up the indy glow gauges wires wrong. Unplug it and change out the fuse and see if it blows again.. if not then you wired it backwards.

[Grouch]

needles are pushed back on too far. Get a fork and pull them away from the gauge faces a bit. ;)

[-Alero-]

or maybe he didnt plug in the gauge cluster to that wiring harness well enough, could of come loose?

[myowneq]

I had the EXACT same problem before. Check ALL the fuses on the left side. If I remember right, my problem was the AC fuse or something really retarded like that.