Need Help Securing Sub Box In Trunk

[wy3134]

I have my setup ready to go, but with some of the other things i am adding into the trunk, i would like to secure the sub box so it dont move around in my trunk, as i will also be placing the motherboard and all the hardware for my carputer in the trunk, so anyone have any ideas for how i could mount the subbox down in my trunk? thanks for the help

[jamcllw]

L-brackets or some industrial grade velcro.

[Caffineboy]

do what i did...screw bolts down through the bottom...making sure u wont hit anything...and use some sort of sealant on the bottom for water...just for extra water protection...works for me and they DO NOT move lol

[wy3134]

thats why i was iffy to screw bolts down through the trunk, cause i dont have access to really get under there to see where the gas tank is and all

[alero_ecotec]

hmmm, mine's not secured, it just weights about a thousand pounds, it's never moved

[ImSoBored]

I'd use several L-brackets.

[Vtolds]

My box doesnt move, but it wieghts like 100 pounds.

[cherrington17]

Mine weights about 120lbs and would normally slide a bit. so i used some L brackets. Everyone says "watch out for the gas tank!" but w/ it all the way up in the trunk, its still about a foot from the tank.

Hope these help.
[attachmentid=8000]
[attachmentid=8001]

The braces hold it good and tight.

[Vtolds]

Yeah the gas tank is actually under the back seat.

[VCguy85]

i used velcro like a long strip on either side and it works beautifully

[Stencil]

I bolted mine in from the seat side with a shed door latch, so one piece is on the frame and one on the box, and I used quick disconnect connectors on the wires.

Nothing worse then having a flat in the middle of nowhere and not having a screwdriver to remove the box with! Plus, if you drag race, makes removing it a snap.

[elitecloud]

just put a couple 10 inch strips of velco on the bottom of the box, and use a staple gun to staple it into the box, works like a dream

[slowandlow]

where is the tank at? i used the same thing but mine is in the back near the mounting of the back seat. and i used 1 and 1/2 in screws.