I would use Bulldogsecurity.com if I was you. Very helpful information. Also there is a sticky in the general perfomance thread with a link to where you can find out about the wiring to your car. Between the two of these I installed mine with no problem.
I finally finished un-"rigging" my remote start a few seconds ago. The haynes manual is a great buy if you ask me. First off you're going to need to order a GM-6 Harness if you wan't the remote start install to be smooth. You'll also need to familiarize yourself with passlock, how it works, and why you want to bypass it. Take a look http://www.aleromod.com/forums/showthread.php?t=20698 and http://www.aleromod.com/forums/showt...ighlight=alarm Catch me on msn messenger at goldstar611 @ hot mail.com as well.
I finally finished un-"rigging" my remote start a few seconds ago. The haynes manual is a great buy if you ask me. First off you're going to need to order a GM-6 Harness if you wan't the remote start install to be smooth. You'll also need to familiarize yourself with passlock, how it works, and why you want to bypass it. Take a look http://www.aleromod.com/forums/showthread.php?t=20698 and http://www.aleromod.com/forums/showt...ighlight=alarm Catch me on msn messenger at goldstar611 @ hot mail.com as well.
Can you explain the GM-6 Harness.
I have looked all over for the hrness. All th sites says it is discontued (sp)
bascially, you unplug the wires from the ignition, plug into GM-6 harness, and plug other end back into ignition. The harness has tapped into all the necessary wires, you just need to connect everything up with crimp connectors and you're set.
The haynes manual is a great buy if you ask me. First off you're going to need to order a GM-6 Harness if you wan't the remote start install to be smooth. You'll also need to familiarize yourself with passlock, how it works, and why you want to bypass it. Take a look 
Linear Mode
