Rattle Suppress?

xsmokex · 03-02-2009, 04:21 PM

Rear view mirror and trunk vibrate like crazy... doesn't sound so great.. i got two 12's in my trunk.. i know some of you guys have bigger subs than me.. how did ya get rid of the rattle? Dynomat is the obvious solution.. but do you know any others?

HazMatt24 · 03-02-2009, 04:41 PM

there is all kinds of dynomat type stuff out there, but that is the route you're gonna need to go

99alerogirl · 03-02-2009, 05:41 PM

yeah, it's really hard to stop that thing from rattling. my uncle suggested putting some clear silicone in there, but it might still rattle.

AleroDrime · 05-18-2009, 11:52 AM

Quote:

Originally Posted by 99alerogirl

yeah, it's really hard to stop that thing from rattling. my uncle suggested putting some clear silicone in there, but it might still rattle.

i did this it stoped mine

now on to why i posted, i fixed that peice rattle like i said and i fixed the clips that broke on the bumper cover, now my only rattle it sthe very top of the trunk lid where it meets the glass, how do i work on this one???

Afugy · 05-19-2009, 01:27 AM

Quote:

Originally Posted by AleroRacing

i saw on an older forum i guy used clear silicone, was pretty specific in an how to style, the post was maybe 3 yrs old, but i checked his thing and it said active a few days before, so i pm'd him about it to try and find out how the clear silicone has held up, anyone got an idea about it

What I did to my'n was use 3M double sided foamy tape.

3M VHB tape

Just got it apart to where I could get the tape in there and stuck it on, I also used in on my plate, lol when it comes off its taking some paint.

Quote:

Originally Posted by AleroRacing

i did this it stoped mine

now on to why i posted, i fixed that peice rattle like i said and i fixed the clips that broke on the bumper cover, now my only rattle it sthe very top of the trunk lid where it meets the glass, how do i work on this one???

Well what ever you do, don't do what my buddy did and just put to much door gap tape in there to make more pressure and eff up the seal.

Misuseofyou · 03-02-2009, 05:52 PM

After fixing those rattles you'll find others. My underbody rattles, clip holding the driver's sun visor rattled, wire in my dash.. etc. I used a bunch of fatmat in the trunk, and it works well, but you'll never get rid of them all. For your rear view mirror, try tightening the screw(s); that fixed mine.

xsmokex · 03-02-2009, 06:24 PM

Quote:

Originally Posted by Misuseofyou

After fixing those rattles you'll find others. My underbody rattles, clip holding the driver's sun visor rattled, wire in my dash.. etc. I used a bunch of fatmat in the trunk, and it works well, but you'll never get rid of them all. For your rear view mirror, try tightening the screw(s); that fixed mine.

+1 thanks

Valley olds · 03-02-2009, 07:28 PM

For the license plate plastic part that joins with the metal part, I've heard dynomat between those two pieces fixes it. As for the mirror, tighten the screw as much as you can. I actually had my mirror fall several times before I did that and now no falling.

AleroDrime · 03-04-2009, 11:03 PM

um i was thinking about at thread for this but i guess it applys, im getting alot of rattling from my vents with out subs so far, usualy moving them alittle bit causes it to quit, makes it sound like busted speak sometimes, but its the vents, anyone esle have this happen and fix it?

AleroDrime · 03-04-2009, 11:04 PM

u guys with the rattlign lisence plates, r u using 4 screws or 2

heineck · 03-04-2009, 11:06 PM

use 4 and put rubber washers in between the plate and car

AleroDrime · 03-04-2009, 11:25 PM

i do used 4 i was gonna recommend that to them

heineck · 03-04-2009, 11:27 PM

yea i had mad trunk trunk rattle with the same thing 2 12's i mean its not perfect but it helps and i dont have money to drop on mat yet

Misuseofyou · 03-04-2009, 11:33 PM

If you wont buy matting to stop your rattles, do it for the extra base. After you do your trunk you'll find the base a lot smoother and you gain back everything that's being lost to the holes and gaps that the sound escapes through. That also means people outside the vehicle hear it less.

Gr1m · 03-05-2009, 07:54 AM

i used air conditioner insulation foam for the back trunk lid, just rip it to size and place pieces where the metal is contacting the plastic, you can also shove some where the rear deack meets the bottom of the back windshield to prevent that rattling, and for my rear view mirror, i dont have one and have not had it for almost 2 years because my subs just overpower it everytime.

lonnie · 03-05-2009, 08:22 AM

You may want to check out the dampening thread that cherrington has up and possible think about going in on a group buy with some of those guys. Its hard to get rid of all trunk rattle, very hard...the body panels on the car are actually expanding and contracting because of the pressure so just doing the trunk is going to eliminate all the rattle. I don't know what they were thinking a GM when they chose to split the trunk like that, and the license plate will rattle constantly unless you use 4 screws ...I actually use two at the top and velcroed the bottom and that has seemed to work but to each his own. Every one has a different solution and you may very well find totally different from us that works better for you.

Good Luck, and welcome to the site...I don't remember a intro thread from you!

Gr1m · 03-05-2009, 08:39 AM

dynomat the back of the license plate and use 4 screws works like a charm lol

AleroDrime · 03-07-2009, 12:00 AM

any suggestions on the rattling vents?

Gr1m · 03-07-2009, 01:43 AM

your talking about the front vents for heat/AC? ive never heard of them rattling

AleroDrime · 03-07-2009, 11:20 PM

yeah the front ones, left diver and right passenger, you move them and it usually stops, even if i put them back in the same position, but is there a way to fix it