11-10-2007, 11:43 AM
|
#1
|
|
Keepin it Real
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 12,522
|
port and polish issues
Hey guys, I've got a 2000 with the 3400. I've had a DHP PCM for a while and wanted to get more performance. I was recommended to port and polish the intake and exhaust. We found out they used abrasive material to do it like gritty sand. So I got with my friend that tunes Hondas and we decided to try it ourselves. We got a bag of sandblasting sand and hooked up into the intake and started the car. We had to hold the gas so it would run. He wanted to let the engine suck in the sand through the intake so it would port it out and then push it out the ehxaust so it would port the exhaust manifold.
After running the car and letting it suck in sand we got about half way through a 25 lb bag. The check engine light was on and the engine was bucking and kicking and sounding really weird. We stopped and hooked the car back up normal and took off the sand supply. We tried to start it again and it was really hard. Once started it couldn't idle and kept making weird noises. We took it out and drove it and it started to make scraping and knocking noises.
Help! Can anyone tell me what to do! My buddy only does Hondas so he doesn't know much about Aleros.
__________________
2015 Audi SQ5
2000 Alero GLS Coupe - still in the family, but I don't drive it anymore
|
|
|
|
11-10-2007, 11:58 AM
|
#2
|
|
Aleromod Old Fart & Owner
Join Date: Feb 2006
Location: Kerrville, Texas
Posts: 8,123
|
Your kidding right?
__________________
Final 500 #448-OCA Preservation Class Winner, Final 500 Alero #219, '02 Bravada
I am officially addicted to Olds
|
|
|
|
|
11-10-2007, 12:21 PM
|
#3
|
|
Soon to be banned again
Join Date: Nov 2005
Location: Bellmore, NY
Posts: 3,372
|
haha.
__________________
I shaved my balls for this?
|
|
|
|
|
11-10-2007, 12:38 PM
|
#4
|
|
GLS member
Join Date: Feb 2006
Location: Evansville IN
Posts: 3,038
|
i know shit about engine but u dont dump sand in them port and polish they take everything out and use like dremel tools to do it your engine is prolly effed and ruined your bddy is going to owe u money
|
|
|
|
|
11-10-2007, 12:41 PM
|
#5
|
|
GLS member
Join Date: Mar 2007
Location: Tx
Posts: 1,295
|
Wow Ive never heard of that process of port n polishing, Ive heard of using tools to port the runners then polish for good flow.
__________________
I love the smell of burned rubber...except when I gotta replace my tires 
|
|
|
|
|
11-10-2007, 12:44 PM
|
#6
|
|
V.I.P. Member
Join Date: Nov 2003
Location: Plano, Tx (dallas)
Posts: 1,643
|
Did you get that in a PM or email? hahahaha
__________________
I dont have an alero no more...
|
|
|
|
|
11-10-2007, 12:49 PM
|
#7
|
|
GX Member
Join Date: Apr 2007
Location: USA
Posts: 8
|
Wow. I don't know if I should laugh or not. It is funny but, I just can't believe someone would do something like that.
|
|
|
|
|
11-10-2007, 01:11 PM
|
#8
|
|
Keepin it Real
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 12,522
|
__________________
2015 Audi SQ5
2000 Alero GLS Coupe - still in the family, but I don't drive it anymore
|
|
|
|
|
11-10-2007, 01:13 PM
|
#9
|
|
Aleromod's most pointless thread starter
Join Date: Aug 2007
Location: Jersey (north and south are 2 diff. states)
Posts: 2,349
|
u should beat him up thats not how u port and polish thats how u kill the engine. the engine doesnt like sand it in. ur whole engine is probably knocked out. it got to the cam and it did its damage from their most likely.
__________________
Quote:
Originally Posted by adam337
whats with all the useless threads lately?..
|
New project 1992 460 big block ford notchback mustang
Goal - Mid 11s all motor.
|
|
|
|
|
11-10-2007, 01:24 PM
|
#10
|
|
GLS member
Join Date: Aug 2006
Location: Grand Forks, ND for school; Langdon, ND home
Posts: 2,632
|
omfg i thought you were serious for a while. i was getting ready to drive down there and slap you.
__________________
2001½ F150 XLT Crew Cab- true dual glasspacks with x-pipe, AEM intake, SCT X3 with VMP custom tunes, full stereo system, HID 55w heads and 35w fogs, 35% tint front and 20% rear, Lightning tail lights
04 F6 Sno Pro Team edition- MBRP race can, ODS clutch kit
01 YZ125- bored out to 144, PnP cylinder and head, Pro Circuit WORKS suspension, many other mods
|
|
|
|
|
11-10-2007, 01:43 PM
|
#11
|
|
V.I.P. Member
Join Date: Nov 2003
Location: Ontario, Canada
Posts: 1,225
|
lol thats been going on awhile. But I do like all the captain obviouses here.
|
|
|
|
|
11-10-2007, 02:35 PM
|
#12
|
|
GL Member
Join Date: Feb 2007
Location: INDIANA
Posts: 263
|
Thats also on the LegacyGt forums
__________________
3400 V6
MSD Coils - NGK Iridium Plugs - Taylor Wires - 62mm RSM Throttle Body - DHP PCM- 180 Stat - TPS Enhancer - Custom 3" CAI - Thunderbolt Spin Cat no resonator - Dynomax Dual exhaust w/ Borla Tips- Cleared Corners/Black Bezels
|
|
|
|
|
11-10-2007, 03:01 PM
|
#13
|
|
GX Member
Join Date: Sep 2007
Location: norfolk, nebraska
Posts: 52
|
when i read that i lmao
__________________
  3.4L V6
|
|
|
|
|
11-10-2007, 03:42 PM
|
#14
|
|
V.I.P. Punching Bag
Join Date: Jan 2006
Location: Lethbridge, Alberta Canada
Posts: 4,313
|
Good fu*king god jon!!!!!! dont EVER.....and i mean EVER DO THAT AGAIN!!! you scared the bloody hell outta me!
p.s
that was awesome for a laugh though!
__________________
WARNING: The consumption of alcohol may create the illusion that you are tougher, smarter, faster and better looking than most people.
|
|
|
|
|
11-10-2007, 04:38 PM
|
#15
|
|
GX Member
Join Date: Feb 2007
Location: Aruba
Posts: 158
|
Like WTF???!?!?!??!?!?!!?!?! Your Crazy like duh , you will destroy the engine
|
|
|
|
|
11-10-2007, 04:42 PM
|
#16
|
|
GX Member
Join Date: Feb 2007
Location: Aruba
Posts: 158
|
Wahahaha
|
|
|
|
|
11-10-2007, 05:36 PM
|
#17
|
|
Aleromod part owner
Join Date: Nov 2003
Location: Far Northeast Philadelphia, PA
Posts: 18,199
|
At first I'm thinking, what the hell is he doing, he's already got the P&P manifolds. They I read "sand in the engine" and I'm like OMG
For those that don't know, sand put into the oil of any car will quickly break down the cyl walls and basicly turn them into peanut brittle, thus breaking the cyls thru the walls and hitting each other, if the motor actually gets that far. The car wouldn't last a block of normal driving
__________________
33% ALEROMOD OWNER!!
2000 Olds Alero 3400 SFI 14.53 @ 94.93
1985 Olds Delta 88 307 SBO 17.96 @ 76.99
2007 Volvo V50 T5 6M 15.782 @ 89.12
www.facebook.com/kb0177
|
|
|
|
|
11-10-2007, 06:08 PM
|
#18
|
|
GLS member
Join Date: Aug 2007
Location: Hartford, CT
Posts: 917
|
whew... man, I was holding my breath for a second
i thought he was serious too
but anyway, if you do something like that to an engine, you probably deserves what happens
|
|
|
|
|
11-10-2007, 06:13 PM
|
#19
|
|
Keepin it Real
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 12,522
|
my engine is already ported and polished, stage 2.
this sand was supposed to take it to stage 3.
__________________
2015 Audi SQ5
2000 Alero GLS Coupe - still in the family, but I don't drive it anymore
|
|
|
|
|
11-10-2007, 06:22 PM
|
#20
|
|
on vacation
Join Date: Aug 2006
Location: that way
Posts: 2,169
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 01:06 PM.
|
LOL. 
