|
Hopefully you haven't had this problem....
Last weekend we had rain on Saturday and Sunday, sometimes heavy. Went to start car on Monday and no start. The car would start for a second and then shut off. Hooked the computer up to the data link and the BCM was missing in action. Turns out that the BCM was full of water from the HVAC leak. Still haven't found the source but I did move the BCM to the side and away from the mount attached to the blower motor mount. You may want to check yours out to make sure you don't have any water sloshing around in there. Mine appears to have been in there for quite some time, slowly accumulating. As soon as I removed it and tipped it the water ran out onto the floor. The BCM isn't sealed so any water will come out through the cracks. Just a heads up...
|
Threaded Mode