replacing PS steering hoses and PS pump valve

[donovandishon]

did this about a month ago the high pressure hose was leaking pretty heavy so i had to replace it.....i went to a salvage yard and pulled a used one......didnt have to change any orings or seals(if you buy a new one it should have all the seals u need to replace and that should just be on the fitting itself) the hardest part is running the hose down the back of the engine and back through the original holes the bolts are 16mm and 18mm undo the hose at the pump and remove it and u will see a tiny oring around the fitting thats the one that will be replaced and they should be included with your new hose.......the pictures are difeffult toget but in the top one you will need 5 and 8 those are your o rings and in the bottom picture 8 will be your oring.....the valve shouldnt even come out