OFFICIAL: What did you do to your Alero today?

[sleepyalero]

Tim, I did not know you had a manual car!

Yup just an ol' 5 speed. Hes got 3 aleros lol

[tw0123]

Technically the clear tails are illegal because there is no reflector on them... i plan to wire the outer peanut bulb to my drls then there will always be a light emmiting from them to attract attention... with the spider lights they provide a lot of light when braking... 81 leds per side flashing in your face!! If you can't see that you shouldn't be behind the wheel of a car lmao

And Paul yes i have a manual... bought a silver sedan a year ago... your old wheels really set it off :)

[tw0123]

had a busy day at the restaurant today...
https://scontent-a-ord.xx.fbcdn.net/hphotos-ash3/1384372_10151876671352557_188084811_n.jpg
gotta love owning your own place :)

[sleepyalero]

You painted them at work? LOL

[tw0123]

yes sir!! its fun being the boss... I can do what I want... washed them down, wet sanded, cleaned with rubbing alcohol, and set up cardboard all around, and went to town with the rattle can :)
served a few customers in between coats, and mirrors, and then went back to it!! hahahaha

[sleepyalero]

Lmao thats awesome

[xXManwhoreXx]

You own a restraunt? What kinda food?

[sleepyalero]

Hey eric welcome back to green

[Valley olds]

Over the last couple of weeks I had a broken exterior mirror, so I replaced both of them with grand am mirrors. My b and c pillars' paint were peeling and got some black pillar covers. And just yesterday, I polished and waxed my car. Today however, it looks like it will rain. Ill post pics later.

[Ecotecalero02]

Just added intake and ga mirroors

[Ecotecalero02]

This is the new look http://s754.photobucket.com/user/nukinfutz08/media/Alero/image_zpsd28b2654.jpg.html?sort=3&o=0

[Valley olds]

Here are some of the newest pictures of my car. Also, I had forgotten to mention I untinted the aleros tails due to having gotten pulled over by a state trooper for them.

http://i282.photobucket.com/albums/kk268/glozanoz6/f77003fe-7f11-41e1-968d-eb5dabc8bac9.jpg (http://s282.photobucket.com/user/glozanoz6/media/f77003fe-7f11-41e1-968d-eb5dabc8bac9.jpg.html)

http://i282.photobucket.com/albums/kk268/glozanoz6/a3755c38-5d70-4ae0-829a-1ff8dd146bec.jpg (http://s282.photobucket.com/user/glozanoz6/media/a3755c38-5d70-4ae0-829a-1ff8dd146bec.jpg.html)

http://i282.photobucket.com/albums/kk268/glozanoz6/b243455b-df06-4185-a72d-1d77b678c8eb.jpg (http://s282.photobucket.com/user/glozanoz6/media/b243455b-df06-4185-a72d-1d77b678c8eb.jpg.html)

[xXManwhoreXx]

Geez valley where you been lol

[Valley olds]

I moved to another city a couple of minutes from where I used to live and was internet- less for almost one year. How about you? Still hanging with the aleromod crew?

[xXManwhoreXx]

Yes sir same old shit

[WIALERO]

Got my new rims on I like these a lot better than the asa rims I first had but other than that cleaned her and washed her and waxed her for the first time in a month also got some quarter panels from another alero so the gt side skirts will soon be gone or I might cut them and make them look not so big and what not but can't wait to get her done!

[03Sleepr]

Got my new rims on I like these a lot better than the asa rims I first had but other than that cleaned her and washed her and waxed her for the first time in a month also got some quarter panels from another alero so the gt side skirts will soon be gone or I might cut them and make them look not so big and what not but can't wait to get her done!

Dude...punctuation...

[S8track16]

That's the longest run on sentence I have ever seen.

[WIALERO]

My bad on my phone... I'm use to it doing it for me but I got a galaxy s3 and it does not do auto correct..

[sleepyalero]

Cause its junk!



















Wait for it.........

[tw0123]

Lmao!!! This could derail quick...

As for me, i own a little fish and chip shop... homemade recipes and passed on from my parents... been going for 22+ yrs now :)

As for the car, i was bored again at work so i painted the rocker covers i picked up at our last meet... they were white but Scott gave me a wicked deal... hoping to put them on this week some time!! Car will look almost whole again haha

[sleepyalero]

Mine is also coming back together. Sitting 5 days (as of today) waiting for a new bracket for front driver side brake. Finally got it today from Baer. Installed and shes back on all four. (Finally!)

Also put in NGK v power plugs today. Waiting for UPS now to drop off my new thundervolt wires. And shes ready to fire up.

Also writing a revised tune to the car this evening.

[Papa Rad17]

^Music to my ears

[WIALERO]

Waiting on a guy to reply back so I can get a new door mine has a big deep gash from a bolt when my uncle had it.... And also waiting to get a new hood also a front and back bumper




P.S sleepy I love this phone just still getting use to it:)

[cavaliers60]

I sold mine. :( Not today, but a little over a month ago...

[xXManwhoreXx]

My s3 does everything but put periods in for me....

[@mgaw23]

brought mine to the body shop to fix my dent, do a hole paint job except the hood im doing a custom job on that once i get my fiberglass hood and my mirrors will be painted and there doing the bumper mod for my dual exhaust

[fisdad]

I fixed my light trio. Cost $301 at the dealer for a new harness but problem solved! Now I just have tranny mounts and a new headliner left to go and I'm good!

[fisdad]

Why my garage was always meant for!


http://i19.photobucket.com/albums/b195/forhiddentears/null_zps3bf52d1f.jpg

http://i19.photobucket.com/albums/b195/forhiddentears/null_zpsdefb5b44.jpg

[Babyblue]

Looking good!!

[xXManwhoreXx]

I'm off tomorrow if you guys wanna spend any time with me... .:-(

[Babyblue]

Well, Its not what I did to my Alero today but it is what I did about a month ago. I drove it to Milzy Motorsports to get the 6-speed manual f40 transmission and a 3500 motor with about 23,000 installed.

[tw0123]

^^ Damn!! nice choice.. any mods to the motor or just a straight 3500 swap for now?

as for me, I finally got these put on :)

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/1377511_10151885206462557_1019406473_n.jpg

next up are the rocker covers to go back on!!

[sleepyalero]

It will have a few mods tim.

[WIALERO]

took out all the plastic peices inside and the door panels ect and washed them with hot water and soap to get the dang smoke stains out of them :/ but they are cleaner got told today my body is far to gone with the rust on the quarter panel into the door jam and to many dings and dents to fix it so im done modding it or putting any money into it 4g alone for body work and thats not including paint... so looking for another alero 2 door with sunroof pref with 3400 blown or alive does not matter

[sleepyalero]

Uh oh CALL THE PRESS! Sleepy has back seats!!!! After about 3 years of not having them, they are back in today.

http://i921.photobucket.com/albums/ad58/natesalero/81D0B9B3-68E8-4681-BCDB-41DF16558ADA-1438-0000008F5B983B78_zps40e2fd62.jpg

[03Sleepr]

why? so people can destroy their face on that harness bar?

[sleepyalero]

Yesssssssss!

[Babyblue]

Damn!!!! looking gooooood. I will travel 400+ miles just to throw up in that back seat.

[fisdad]

Damn!!!! looking gooooood. I will travel 400+ miles just to throw up in that back seat.

Roflmao!!! You sir I will let in just for that!

[Cliff8928]

why? so people can destroy their face on that harness bar?

Yesssssssss!

Harness bar? More like ultimate Oh #$%^&* handle.

[sleepyalero]

Parker! Ill unbolt that soon to be 6 speed of yours without question! Lol

Def a nice oh shit bar

[WIALERO]

replaced the plugs today and cheched some lines in the back and all around

[sleepyalero]

Couple days ago but installed new oil pressure gauge

http://i921.photobucket.com/albums/ad58/natesalero/32B038CD-151B-49C7-9C8B-CB67391AD03D-266-0000000F687D70B4_zps2844c9bd.jpg

[WIALERO]

Couple days ago but installed new oil pressure gauge

http://i921.photobucket.com/albums/ad58/natesalero/32B038CD-151B-49C7-9C8B-CB67391AD03D-266-0000000F687D70B4_zps2844c9bd.jpg

:coolio:

[Seorsum]

Over the weekend I replaced my heater core. After a couple trips to the junkyard to get it for only $30, ended up breaking the heater core cover as I was trying to take out my old leaking one. I went to the Chevy dealer to price for a new one: $80! Nope. Back to the junkyard got one for $12 :awesome:
Installed it, flushed radiator and now a working heater for the winter months!

[03Sleepr]

new radiator hose...again.

[sleepyalero]

Lol which one?

[03Sleepr]

Lol which one?

upper, headers burnt through it again, even though the headers are wrapped and the hose was tied away from it...

[Papa Rad17]

Harness bar? More like ultimate Oh #$%^&* handle.
:rotflmao: :rotflmao:
upper, headers burnt through it again, even though the headers are wrapped and the hose was tied away from it...
to much hot!!!!! but seriously... that doesnt sound good. cheap hose? never heard of that before.

[Matthew]

I ordered a chrome air intake and cleaned my headlights

[sleepyalero]

I ordered a chrome air intake and cleaned my headlights

Make sure to go to an auto store and get a spectre or k&n filter to replace the ebay one.

Spectre filters are half the cost and imo just as good as k&n

[Matthew]

What size is the filter

[sleepyalero]

Spectre has a universal one. For like 3 different sizes. I believe its 3 inch.

[WIALERO]

well after sitting for a while i finally started her up went for drive started her up again herd a loud pop and lost rpms went to zero all electrical failed then pulled over wiggled the battery connection around and started right up

[WIALERO]

also found my pa and cb hmmm.....mess with people again? maybe train horn people? hmmmm i no its dumb but its funny! you have the people that laff at it then you have the seriouse people... what do ya all think?

[tw0123]

I went for a cruise in mine laast night... parking brake light kept coming on and off then it would flash... then when i hit anywhere between 50-70 mph the speedo just danced...up and down.... bob bob bob... i had no clue how fast i was going... kept witing to get pulled over on that :p

[@mgaw23]

got it back from the body shop! installed header and exhaust! love the car! fixing the cruise tmrw morning

[Babyblue]

train horn...

[WIALERO]

yes......maybe...idk

http://www.youtube.com/watch?v=2kDORB3vR8s

[sleepyalero]

Took my harness bar out. Painted 2 lighy blue stripes in the middle of it to match fenders.

http://i921.photobucket.com/albums/ad58/natesalero/20131024_180353_zps923d991a.jpg

[@mgaw23]

100 percent respect!

[xXManwhoreXx]

Took my harness bar out. Painted 2 lighy blue stripes in the middle of it to match fenders.

http://i921.photobucket.com/albums/ad58/natesalero/20131024_180353_zps923d991a.jpg

You deserve a throat punch

[sleepyalero]

You no like?

[Whitetigerboi83]

I didnt do it someone else did:
http://i233.photobucket.com/albums/ee216/tigerboi83/RIP%20ALERO/20131025_175751.jpg (http://s233.photobucket.com/user/tigerboi83/media/RIP%20ALERO/20131025_175751.jpg.html)
more picts here:
http://www.aleromod.com/forums/showthread.php?t=37520

[WIALERO]

kinda tried with the cluster but light still shows threw a little but oh well i was to lazy to swap my c/b over to this cluster i just wanted to work on the lighting on it but here it is

[sleepyalero]

Electrical tape

[WIALERO]

did that but its all taped up now again just gunna put it in later

[WIALERO]

Electrical tape

and found this for you sleepy maybe you need this lol

http://chicago.craigslist.org/nwi/cto/4170946203.html

not the car but just what it has on the front

[sleepyalero]

Nice find. If I could get it for 600 or so I would take it. But still nicely priced.

[WIALERO]

i ment the braw on the front of it lol ive never seen that before but looks ugly just my 2 cents

[sleepyalero]

you never seen an alero with that? wow. lol

ive seen em.

oldsnut uses one on his final 500 for highway driving.

[WIALERO]

bugs just need a lil elbow grease to be taken off the bumper lol and nope never seen one on an alero b4 if seen one just covering the little part of the hood like maybe 4 inches of it but not the bumper or ect

[guiguilandry]

he probably don't care about the bugs... but the stonechips....

[WIALERO]

he probably don't care about the bugs... but the stonechips....

true..... im still up from 3 days ago so my mind is just poping up the simple things 1 awanser crap :/

[03glgold]

go to sleep before you have more issues than you already are

[WIALERO]

go to sleep before you have more issues than you already are

eh i wish but i live in a house with my gf and her deranged/losing his mind grandpa and sleep me and her do not knoe that word he is constantly screaming and yelling.. trust me im about to go sleep in my car but my friend has it up at his collage for his class so im sol for now but slowly regaining full awake with redbull cigs and job hunting and sending resumes :rolleyes2:

[WIALERO]

good news also finally my tax return finally came after filling last march or whenever it was so after i pay a few things and such im going to be able to get my donor alero from the scrap yard yay!

[03glgold]

within a certain time span your blood chemistry starts to change from lack of sleep and it becomes hard on your body more than you know...Even being half an hour to an hour low from the recommended 8 hours of sleep cuts brain function noticeably, so try and find a way to sleep at some point dude especially if you are trying to get a job, being strung out from no sleep isn't a very good way to make a first impression

[WIALERO]

within a certain time span your blood chemistry starts to change from lack of sleep and it becomes hard on your body more than you know...Even being half an hour to an hour low from the recommended 8 hours of sleep cuts brain function noticeably, so try and find a way to sleep at some point dude especially if you are trying to get a job, being strung out from no sleep isn't a very good way to make a first impression

well i did and feeling better now

[WIALERO]

messing around with the cluster again

[WIALERO]

took a pic and drove her up the street and back

[sleepyalero]

Thats a dope pic

[WIALERO]

Thats a dope pic


Thanks :) I could probably do one of urs if ya want :P

[sleepyalero]

Maybe soon.

[WIALERO]

Maybe soon.

maybe but its nice getting a compliment :)

[kinkyredalero]

I Officially have HIDs in my alero now....glad i got them in took 2 1/2 weeks to get them in the mail though...Thats what i did to my alero today

[03gxeco]

last post was december. BUMP! well today( and for the past few days) ive been letting my wife drive the alero because some asshole decided to slash the tire on her grand am and break off a side mirror while we were eating a nice family meal in a resturaunt.. WTF would compell someone to do shit like that? the car was parked appropriatly in a spot with child seats in it are you fucking kidding me? so now i have dual post mirrors on the way for her grand am and im looking around for a new set of wheels/tires.

[Babyblue]

It was done last summer after I realized everyone at ASS was looking at the black spots and the tan discoloration under my hood and it was bugging me. So this is what I did about it,

Before...(Black spots are sanded down at this point)
http://i73.photobucket.com/albums/i238/Baby_blue1993/image3_zps3c2e389a.jpeg (http://s73.photobucket.com/user/Baby_blue1993/media/image3_zps3c2e389a.jpeg.html)

After...
http://i73.photobucket.com/albums/i238/Baby_blue1993/image5_zps02a03317.jpeg (http://s73.photobucket.com/user/Baby_blue1993/media/image5_zps02a03317.jpeg.html)

[Alerojester]

messing around with the cluster again

ok I know im on and off the sight a lot but that's cool as hell, almost looks like something I would do with my cluster... what did you do lol NEWB moment and don't feel like skimming too much lol (being lazy)

[Babyblue]

I can't do this till I get her back but I got the Camaro Calipers.

[tw0123]

I got the front bumper on and put in my h&r's ;) baby steps. ..

[01OhioAlero]

Took front head off and crossover pipe. Back is gonna be a pain. I need a flex wrench for it:(

[03Sleepr]

ordered junk for my LIMG.

[sleepyalero]

Replaced a coolant hose.

[tw0123]

got the back bumper on dropped her down on to the wheels (first time in 16 months) :)

[fisdad]

Didn't sell her, so I went for a victory lap around I-465 and rocked out to some horrible music.

[guiguilandry]

got the back bumper on dropped her down on to the wheels (first time in 16 months) :)

pics !!!!!!!!!!!!!!!!

[tw0123]

Lol maybe it's gonna be a secret til it's done!

[tw0123]

So tonight brought new weird issues... put the battery in and some of my leds came on without the key even in the ignition... then one of my hids does the same... started her up ran like a kitten... nice and smooth :) turned her off and the leds stayed on one hid stayed on and all my tail lights stayed on as did my svs and trac off lights til I disconnected the battery....
Any suggestions??? Lol I'm ecstatic that she started up so easily and ran super smooth but just weird lol

And I also got the silver car out of the snow and took her for a cruise :)
Good day overall!

[fisdad]

So tonight brought new weird issues... put the battery in and some of my leds came on without the key even in the ignition... then one of my hids does the same... started her up ran like a kitten... nice and smooth :) turned her off and the leds stayed on one hid stayed on and all my tail lights stayed on as did my svs and trac off lights til I disconnected the battery....
Any suggestions??? Lol I'm ecstatic that she started up so easily and ran super smooth but just weird lol

And I also got the silver car out of the snow and took her for a cruise :)
Good day overall!

Uh oh! Sounds like you seed some resistors and maybe an ignition switch?

[tw0123]

I have resistors in most of them lol not sure where the bug is right now. Have more investigation to be done lol

[02AleroGLS]

Well over the past few days I've replaced the serpentine belt,tensioner,both front wheel hubs cause the abs sensors were bad. Dropped the sub frame to change the steering rack due to it pouring fluid out where the steering yoke hooks up. Installed a 4 new struts. Installed new brake caliper brake clips and whatnot. Installed new msd coils and msd wires. Also replacing my wore out cone filter lol I tried to bust the harmonic balancer bolt loose with my impact but no luck so I'm gonna use some freeze off and see how that goes..

[Papa Rad17]

Well over the past few days I've replaced the serpentine belt,tensioner,both front wheel hubs cause the abs sensors were bad. Dropped the sub frame to change the steering rack due to it pouring fluid out where the steering yoke hooks up. Installed a 4 new struts. Installed new brake caliper brake clips and whatnot. Installed new msd coils and msd wires. Also replacing my wore out cone filter lol I tried to bust the harmonic balancer bolt loose with my impact but no luck so I'm gonna use some freeze off and see how that goes..

Warm weather = project time! sounds like thats going to be a nice ho when your done :coolio:

[02AleroGLS]

yeah I didn't have the cash to spare to fix it up for about a year lol so now I'm playing catch up. I'm just hoping that bolt breaks loose on the harmonic balancer lol

[[ion] C2]

Drove it for the first time in 3.5 weeks. But now there's more snow coming tomorrow. Can it be summer yet?

http://evilhare.com/ns/alero031114.jpg

[S8track16]

Got a vector image program today for making decals. This is what happens when you put an actual image in:

[sleepyalero]

Replaced water pump (200k on orignal!) And today... radiator.

[IAmJordanBecker]

Cleaned it inside and out, First time since I did the rims black, looks so good!

Smells good too on the inside :)

[[ion] C2]

replaced all 4 fuel injector o-rings and put new bolts and lock washers in and secured the fuel rail super low so it's really pressing against the injectors. won't leak anymore.
removed air filter, installed specifically ordered stainless mesh


http://evilhare.com/ns/alero_033114/DSC_0024.jpg

http://evilhare.com/ns/alero_033114/DSC_0022.jpg

http://evilhare.com/ns/alero_033114/DSC_0021.jpg

http://evilhare.com/ns/alero_033114/DSC_0026.jpg

[AleroB888]

C2;653206']
replaced all 4 fuel injector o-rings and put new bolts and lock washers in and secured the fuel rail super low so it's really pressing against the injectors. won't leak anymore.
removed air filter, installed specifically ordered stainless mesh


http://evilhare.com/ns/alero_033114/DSC_0024.jpg

http://evilhare.com/ns/alero_033114/DSC_0022.jpg

http://evilhare.com/ns/alero_033114/DSC_0021.jpg

http://evilhare.com/ns/alero_033114/DSC_0026.jpg



^ Looks good, but is that for race-mode testing? That things gonna pull stuff in like a vacuum. ;)

[[ion] C2]

^ Looks good, but is that for race-mode testing? That things gonna pull stuff in like a vacuum. ;)
I ran it without a filter for a year, it's fineeeee. :awesome:

It's in the back, not much gets up in there. It sounds a lot better. I don't trust any of my filters' flow, I want maximum airflow.

[sleepyalero]

Honestly. Alot of the turbo cars I see around here run no filter/mesh period. Or just run mesh.

[kinkyredalero]

I re-did my headlights so they look alot better..

[tacollins]

Washed, and half way finished waxing my car the other day. Troubleshooting some issues with the ignition (I believe it's my coils...) and went by the dealers garage and got some noises checked out said it had to be a collapsed lifter.

[Seorsum]

I had my windows tinted. 5% Back, 50% Front http://i.imgur.com/1mUXxsU.jpg

Plasti-dip'd my rims. I think it goes well with my paint and tint. Spots are just water. :)
http://i.imgur.com/ObXuTTt.jpg

Front shot for no reason :awesome:
http://i.imgur.com/wY7HIhx.jpg

Also recently, changed my CAI to a WAI. Replaced spark plugs, wires, and ignition coils. Cleaned MAF and TB.

[03Sleepr]

Finally got around to changing my LIMG. by far the worst oil I've ever seen..

[sleepyalero]

Im gonna ask about your turbo dat ho fund

[03Sleepr]

wanna donate?

[sleepyalero]

Lmfao! Wanna donate to mine!? Lol

[03Sleepr]

I'll donate $500, if you front me $1,500..

[sleepyalero]

Hahah no way!

[rustyballs_69]

Replaced both crank sensors and did a crank case relearn. Got a new AEM dry flow filter installed on the cai.

[03gxeco]

putting new dual posts on the grand am. mickey ears are ugly.

[tw0123]

moved her for the first time in 2 years...
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/1978650_10152280954072557_4302146583379061047_n.jp g
damn thing started right up... after I got her unstuck from the iceberg she moved great! why did she have to rot...

[S8track16]

Officially back on the road for the summer. Cleaned up the engine bay, wash and wax...added the correct hub rings.

http://i1314.photobucket.com/albums/t573/S8track16/20140411_094514_zps74ceb4d7.jpg (http://s1314.photobucket.com/user/S8track16/media/20140411_094514_zps74ceb4d7.jpg.html)

I think 1 inch wheels spacers on the back would make it more flush.

http://i1314.photobucket.com/albums/t573/S8track16/20140412_125533_zps5fa25b62.jpg (http://s1314.photobucket.com/user/S8track16/media/20140412_125533_zps5fa25b62.jpg.html)

[That01Olds]

Officially back on the road for the summer. Cleaned up the engine bay, wash and wax...added the correct hub rings.

http://i1314.photobucket.com/albums/t573/S8track16/20140411_094514_zps74ceb4d7.jpg (http://s1314.photobucket.com/user/S8track16/media/20140411_094514_zps74ceb4d7.jpg.html)

I think 1 inch wheels spacers on the back would make it more flush.

http://i1314.photobucket.com/albums/t573/S8track16/20140412_125533_zps5fa25b62.jpg (http://s1314.photobucket.com/user/S8track16/media/20140412_125533_zps5fa25b62.jpg.html)

Looking good! I washed and waxed my car yesterday and great job on cleaning up that engine bay. That's definitely one of the cleanest I've ever seen lol. Especially for a 12 year old car. Props for that man.

[rocketfast321]

moved her for the first time in 2 years...
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/1978650_10152280954072557_4302146583379061047_n.jp g
damn thing started right up... after I got her unstuck from the iceberg she moved great! why did she have to rot...

Weird

I just put tint on my car
http://i187.photobucket.com/albums/x311/rocketfast321/alero/dc858c47-af76-4586-82c9-5a022aa184c4.jpg

[tw0123]

hahaha... nice!! as you can see mine has seen many better days due to rust... looked like a piece of swiss cheese when I bought her for a bottle of tequila, then fixed her up and drove her for 2 years... replaced her with that silver one in the background, and have missed this one...

[Alerojester]

Debated on lowering it, its still not running but the thought is still lingering in my head.... 18's an hella wheel gap......

[S8track16]

I think I should buy a lottery ticket.

http://i1314.photobucket.com/albums/t573/S8track16/20140417_121749_zps9cb09b9f.jpg (http://s1314.photobucket.com/user/S8track16/media/20140417_121749_zps9cb09b9f.jpg.html)

[Papa Rad17]

Headlights aimed, fluids in check, tire pressure, weather stripping glued down, stickers removed, and some cleaning here and there. Nice to be back in the game! :cool:

[fisdad]

Headlights aimed, fluids in check, tire pressure, weather stripping glued down, stickers removed, and some cleaning here and there. Nice to be back in the game! :cool:

Pics or it didn't happen

[sleepyalero]

Well. My car died at fisdads. Stock pump shit on me at 203k miles!! Cant bitch really. But fisdad was nice enough to let me stay the night. We went to Milzy's in the AM and got myself a walbro fuel pump for replacement. Went back to his place. Pulled my tank. Pulled pump assembly out and modified it for the new walbro pump. Runs like new again. :)

Thanks again buddy for everything!! You are a good friend. I owe you gas money tomorrow for the ohio trip. :)

[Papa Rad17]

Hazard button replaced, LED gauge lights in, after market steering wheel installed, seat belt stops on, window clips fixed... successful day. Have to finish putting the coverings back on the column tomorrow and decided where to mount the cruise for sure. The ho is coming along quite nicely. Once I get a few more things wrapped up I'll get pics up next week probably.

[tw0123]

https://scontent-b-mia.xx.fbcdn.net/hphotos-prn1/t1.0-9/10175000_10152329315897557_7574336316747219878_n.j pg
new gauges installed... all blue...

https://scontent-a-mia.xx.fbcdn.net/hphotos-ash3/t1.0-9/10325710_10152329316282557_7289124823458789549_n.j pg
soooo dirty... but the first time she's been outside in 18 months... so much left to be done though...

[fisdad]

https://scontent-b-mia.xx.fbcdn.net/hphotos-prn1/t1.0-9/10175000_10152329315897557_7574336316747219878_n.j pg
new gauges installed... all blue...

https://scontent-a-mia.xx.fbcdn.net/hphotos-ash3/t1.0-9/10325710_10152329316282557_7289124823458789549_n.j pg
soooo dirty... but the first time she's been outside in 18 months... so much left to be done though...

Good to see her moving along! Look at those dash lights on! What gauges did you go with? They look good! And where the hell did those 5 spoke wheels come from? I like them! Ahhhhh dude those door pillars are rough! And the rears a pita to get off! Looks like you're rear door is getting a little rusty. There is a bronze alero being parted out in northern ohio though with super clean rear doors.

[sleepyalero]

Hes getting all the crap fixed. Lol

[tw0123]

^^ yes as nate said it'll all be fixed....

Those 5 spokes came from Paul's ga a couple years ago now. Had them on tequila then last summer they went on the silver 5 speed. My stock rims are bring used for winter rims so these had to go on for the work to be done

[rocketfast321]

Find out why abs light was on. The hard plastic line broke. This also explains why it worked sometimes on the rain.
http://i187.photobucket.com/albums/x311/rocketfast321/alero/NCM_0015.jpg
http://i187.photobucket.com/albums/x311/rocketfast321/alero/NCM_0016.jpg

[03glgold]

http://i1327.photobucket.com/albums/u661/03glgold/IMG_20140428_115149_zpswjhy6oz8.jpg

[negolien]

Got trunk sound dampened..

http://s1229.photobucket.com/user/Negolien/story/29019

[S8track16]

What brand is the deadening, thickness, etc.?

[negolien]

Stinger expert not sure the specs. They also put a Foam Damping Mat on the bottom with regular dampening material over it. They did a good job on the bottom, rear deck and the trunk lid. I wasn't impressed with the sides.

[sleepyalero]

Washed her!


http://i921.photobucket.com/albums/ad58/natesalero/20140505_150724_zpsdgenuvu3.jpg (http://s921.photobucket.com/user/natesalero/media/20140505_150724_zpsdgenuvu3.jpg.html)

[S8track16]

Washed her!


http://i921.photobucket.com/albums/ad58/natesalero/20140505_150724_zpsdgenuvu3.jpg (http://s921.photobucket.com/user/natesalero/media/20140505_150724_zpsdgenuvu3.jpg.html)

Are your calipers yellow?

[sleepyalero]

Are your calipers yellow?

Nope. Its a dodge dart paint code. Paint is called citrus peel pearl.

http://i921.photobucket.com/albums/ad58/natesalero/SpeedyG_121101_PF_zps1hqcwack.jpg (http://s921.photobucket.com/user/natesalero/media/SpeedyG_121101_PF_zps1hqcwack.jpg.html)

And out in sunlight:

http://i921.photobucket.com/albums/ad58/natesalero/20140401_152942_zpsgcrjijyu.jpg (http://s921.photobucket.com/user/natesalero/media/20140401_152942_zpsgcrjijyu.jpg.html)
http://i921.photobucket.com/albums/ad58/natesalero/20140405_195645_zpsbplfvuce.jpg
(http://s921.photobucket.com/user/natesalero/media/20140405_195645_zpsbplfvuce.jpg.html)http://i921.photobucket.com/albums/ad58/natesalero/20140405_195656_zpspsnf9cwd.jpg (http://s921.photobucket.com/user/natesalero/media/20140405_195656_zpspsnf9cwd.jpg.html)

[Papa Rad17]

Headlights cleared and bezels painted. Razzi spoiler painted and installed, cleaned some things here and there. Successful day.

[tw0123]

When's the reveal papa? I'd love to see some pictures of your new toy :)

[sleepyalero]

I got to see it in person like a week ago! He picked up that orange razzi I had for sale. :)

[Papa Rad17]

I got to see it in person like a week ago! He picked up that orange razzi I had for sale. :)

its not orange anymore. Took a couple of sheets of sand paper to smooth it all out but it turned out pretty good. The car looks tremendously better then when you saw it last week nate, iv spent some time on it :cool:
The reveal will be very soon, I'm about done with the small stuff. I'm mostly just waiting to hear back from the guy that has my strut bars but more than likely I'll get some pictures up tomorrow.

[sleepyalero]

Sick cant wait to see. Also happy to have you back in the group!

[Papa Rad17]

I am happy to be. I,ll take this alero over about anything. 33mpgs and enough power for my purposes at least. Much better to work on the mustang and gto. My only complaint is the strut mount and the front end shows it mileage but all that was going to get done anyway. Few dents here and there but that's what you get with older cars. Still drives better then half the new crap they make now a days!

[03gxeco]

took the window tint off the wifes alero :( fucking state police are douchebags in new york. but now i can get the ticket thrown out.

[zzyzzx]

Drove it and added some r134a. The car hadn't been driven since last December.

[sleepyalero]

Must be nice!

[number53alero]

I replaced the front seats in my F500 alero so they don't get damaged. It's so easy to swap seats now compared to my old Cutlass Ciera. Trying to keep the unique stuff in good shape and the replacement seats were only $25/piece not bad.

[Papa Rad17]

Strut tower bars installed, same ones off my old one! Finally got the piece for the passenger side 12v outlet, interior is now pretty well buttoned up. Ordering HID's next week then exhaust.

[negolien]

I charged my AC with some A/C Pro. Super product with just the right length of hose. I do hate living in Calif. though we pay a $10 core charge. One other thought about charging the A/C... My car had been sitting in the sun all day and I only ran it for maybe 10 min's... Burned the crap outta my forearm pulling the hose off and capping the fitting LOFL. Anyone have a way to so this without burning yourself? Long sleeve shirt maybe?

http://i1229.photobucket.com/albums/ee472/Negolien/th_burn001_zps58cb78e6.jpg (http://s1229.photobucket.com/user/Negolien/media/burn001_zps58cb78e6.jpg.html)

[Babyblue]

Finished last night. But deleted my A/C.

[number53alero]

I replaced my drivers side back window motor setup as the clip broke. The good thing is that I was able to get a Dorman one for only $50 off of Amazon.com, way cheaper than even rockauto.com.

[Oldsman]

The update on the OSV...........wing almost done. Got the new interior. Welded the rear quarter on the car. Next is fixing the rust on the other quarter then begin the nightmare called OSV rockers. Also gut trunk and interior. Redo in leather. New sound system. New gauges. Embroidered headrests.

Almost forgot........more chrome.

[sleepyalero]

To much chrome;)

[Papa Rad17]

And it was nice before. Can't wait to see the finished product.

[03glgold]

To much chrome;)
Naw...that is hard to do

[Oldsman]

To much chrome;)

No such thing. Have u not seen The Beast

[sleepyalero]

I have duh. And its a beauty! Love that car. Lol you need to post pics of it. I miss it :(


I changed my oil and just picked up new retainer clips for my headlight covers for the show since I lost mt old ones... :( put them in a box and think I accidently threw it away or put it somewhere to where I knew I wouldnt lose them but I have hid it from myself... ill find em in 2 days I know it haha.

[Babyblue]

Big Brakes!!!

[03glgold]

No such thing. Have u not seen The Beast

Oh it is possible but takes a lot

http://www.mazeforge.com/Words/wp-content/uploads/2008/10/image-3.jpg

[That01Olds]

I have duh. And its a beauty! Love that car. Lol you need to post pics of it. I miss it :(


I changed my oil and just picked up new retainer clips for my headlight covers for the show since I lost mt old ones... :( put them in a box and think I accidently threw it away or put it somewhere to where I knew I wouldnt lose them but I have hid it from myself... ill find em in 2 days I know it haha.

I still have the pics I took of the beast on my computer lol. Man is that car one sweet ride. I love it too. An awesome car for sure! :awesome:

[Papa Rad17]

Installed rear view w/ map light and dome light that had the map lights as well. leds should be in for them all tomorrow. Getting ready to order everything for new steering. rack and pinion, new tie rods, inner and outer bushings, sway bar bushings, everything.

[Papa Rad17]

Removed door trim, much better. Wish I got this done before homecoming.

[sleepyalero]

Nice

[[ion] C2]

Tuned a bit more yesterday.

[Papa Rad17]

Finished the black around the top half of the tails. much better
and 3rd brake light led. I used what was left over from the length I wanted for the side mirror turn signals. perfect fit.

[Papa Rad17]

HID's came in. 55w 8,000k they look and work great like usual. ddm tuning gets another +1 from me.
and a night pic of the tails I grabbed last night

[sleepyalero]

need more headlight retrofit. less HID in stock housing! :lol: :D

[Oldsman]

The fixed OSV rockers.......What quality. Made in the USA.


I want what they were smoking when they made these.

[sleepyalero]

So are those pieces of wood and screws temporary or??

[Oldsman]

Temporary. Have to extend both of them still. One side is 1/2 short and the other is 3/8 short.

So have to reglass them and reshape.

[mfuller]

^ Whoa.
Scot, your car's going to look incredible when it's all done.
Nice work.

[tw0123]

**Scot... did you have them cut at the front or back to extend? Why not go right in the middle to extend, or will it be easier to reshape just the end vs the middle? I haven't tackled mine yet hence all the questions lol :) I'm having a shop do it for me at this point just want to have a good game plan when I go in.... thanks for any advice!

[sleepyalero]

Okay cool lol. Cant wait to see the final product.

[Oldsman]

**Scot... did you have them cut at the front or back to extend? Why not go right in the middle to extend, or will it be easier to reshape just the end vs the middle? I haven't tackled mine yet hence all the questions lol :) I'm having a shop do it for me at this point just want to have a good game plan when I go in.... thanks for any advice!

We went with the front to cut and extend. It was the flattest of the rocker and would be easier
To shape. Also because the driver side end was not square at all. We had to cut and reposition and make it straight. The rear of that rocker is the same but not as bad. The glass quality is thick/thin all over. I still have to get metal so we can attach the bottom to the car and build a ledge for the door opening so it has something to sit on.

It appears they intended for the rockers to sit out at a angle rather than straight. This based on the ledge on the inside of the rocker that I had to cut off. Which this would look stupid coming down from wheelwell and then angling out rather than continuing the body lines.

[Oldsman]

Surprised no one caught the teaser...............lol

[[ion] C2]

what that your rear end is being worked on too?

i forgot you didn't have the lip spoiler done

[tw0123]

I think he's talking about the moulded osv spoiler ;) not just the rear end lol

[03glgold]

I just saw a 2000 gls that was traded in a block from my apartment...the part that is strange to me is that it has cleared corners with black bezels and white guages, is from the area and i never saw it before now to try and talk to the owner

[Babyblue]

need more headlight retrofit. less HID in stock housing! :lol: :D

Yeah. I agree. That's on the list.

[Papa Rad17]

Cant wait to see the finished project Scot!

[[ion] C2]

showing off to way too many people, need to settle down before i get in trouble lol

[sleepyalero]

How

[[ion] C2]

just racing everyone who wants to race me

[Papa Rad17]

Got my factory key blanks in today. Got them cut for free! just a nice little thing to have after some crappy giant thing. much more proper for the car and one of those little things that was just bugging the crap out of me.

[sleepyalero]

C2;655980']just racing everyone who wants to race me

haha be smart, and you wont get caught. ;) how do you think i do it haha.

[[ion] C2]

higher risk of crashing and unnecessary strain on the car lol

raced a bike and kept up/started walking away... him and i were both surprised. lol it was probably a slow one but still, it was neat.

[tacollins]

Got my tyres ordered last week, and got them installed on monday. Nitto NT450s, look real nice on the car (nice tread depth too, however they like to sling those rocks...), now I'm trying to figure out the warranty papers >.< 45,000 mile treadwear warranty is no good without the papers filled out -_-

[[ion] C2]

raced a new mustang 5.0 manual, beat him of course, afterwards complimented each other on our cars

woo

crossed 136,000 miles

[sleepyalero]

Lol I beat a 90 v8 camaro (unknown mods), 03ish boosted audi TT (mods unknown), and a "built" as they said late 90's integra.

Lets just say they didnt expect my car to be that fast haha. :) then some people joked to them saying "you got beat by an alero!"


I just like being unexpectedly fast to a good majority of cars out there because no one here sees aleros modded. Im the only one who has a nice modded alero at the "drive ins" others are just stock beaters basically. But usually im the only one of my kind. Which is nice. I like being different.

[Valley olds]

^Gotta agree with you as far as having a modded Alero. Well lately, I have not really done much with it. New fuel pump on Friday, and a quart of oil woo hoo. Also, when I was thinking of getting new subs, my alternator messed up, so I had it rebuilt. I also got a trunk mount bike rack for it to carry my wife's and my bike on it. Hopefully on Tuesday, I will wash the Alero, and on Wednesday, I'll take it to Falcon Lake.

[negolien]

I had her interior and exterior detailed.. I' am getting ready for some install work and wanted a clean car.

[Babyblue]

Lol I beat a 90 v8 camaro (unknown mods), 03ish boosted audi TT (mods unknown), and a "built" as they said late 90's integra.

Lets just say they didnt expect my car to be that fast haha. :) then some people joked to them saying "you got beat by an alero!"


I just like being unexpectedly fast to a good majority of cars out there because no one here sees aleros modded. Im the only one who has a nice modded alero at the "drive ins" others are just stock beaters basically. But usually im the only one of my kind. Which is nice. I like being different.

same here people don't see the alero going to be that fast. Everyone at the meet ups at sonic around here are like i've never seen a alero modded like that.

[01OhioAlero]

Hell even a stock alero is honestly not that bad. It can keep up with most new modern ecobox's like focus's or cruze's which surprises a lot of people because they think if its not new its a slow piece of junk.

[sleepyalero]

Let me just say I had a cocky 2012 v6 camaro at a red light one night wanting to go. Well lets just say my 3500$ alero (not including mods) ate that 25k camaro.... he was very shocked. Hahaha


But anyway... I seafoamed my car today and then changed the oil because of the seafoam. Its been about 80k miles since the last cleaning.

[zzyzzx]

Just replaced the battery. This time I got a Group 75DT battery, with the DT being "dual terminal". It fits perfectly fine as there is not a clearance problem with the top posts. I did this because at some point I might replace the battery cables with slightly longer top post versions.

[Papa Rad17]

On Friday I broke down. I thought the cat had finally clogged up (its been running low catalyst efficiency for a while). Get it towed to the shop, a foot of new pipe and a code eliminator for it later the car still didnt run and my fears came true. So a new fuel pump/filter later its back on the road running better than ever, and it wasnt running bad before. I have to do something about the exhaust though, it sounds terrible, the worst tin can rice rocket sounding thing iv'e ever heard.
2.2 people, factor exhaust minus the cat SOUNDS TERRIBLE.
I cant do my full build like I wanted right now due to the fuel pump issue. for now I'm thinking cut the resonator (its shot as well) and a proper muffler piped for quad tips. I've checked out countless videos of everything I can find with the 2.2 and magnaflow is at the top of the list. but due to the price and that its temporary I'm considering this http://www.ebay.com/itm/260941524042?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
I know, I know. but its cheap, will make piping much easier off the factory exhaust due to its size, and is light weight. I dont know how legit the "aggressive race sound" is, im assuming not much but it would get the job done for now. Thoughts?
Also- I removed the heat shield because all its mounts were shot but one and it was rattling around sounding terrible. to me it looks like theres enough space there for airflow and no melting on the tank or anything that I can see thus far. has anyone else ran without it? do I need to fix and reinstall asap or am I ok?

[[ion] C2]

heat shields are all gone on my car for years

[negolien]

Had to do another window motor and regulator on the front passenger. Only the rear passenger left to do :rolleyes2:

[Papa Rad17]

Finally got a headunit and installed my amp as well. kenwood exlon headunit, 4 channel kenwood performance series ready for the front speakers when I get them. Powering the alpine type r 6X9s right now. So nice nice to have good ipod connect and good sound again!

[aleros_eat_rice]

Re-inspect. Failed inspection for ps front tire and ds outer tie rod end. Passed re inspection

[TDavis]

:awesome:


http://i965.photobucket.com/albums/ae136/TiiZoXiC/20140706_164924_RichtoneHDR_zps34654778.jpg (http://s965.photobucket.com/user/TiiZoXiC/media/20140706_164924_RichtoneHDR_zps34654778.jpg.html)

[sleepyalero]

Get that red grand am outta here.

[Papa Rad17]

sc/t mmmmmm. I like

[mfuller]

It's been a few days, but on Saturday I met up with ate and Ryan.
They had scored a set of headlight covers for me and plasti-painted them.
It's amazing how something so simple can make such a profound difference in underhood appearance.
Thanks Nate and Ryan! It was great seeing you guys.

[sleepyalero]

You as well matt!


I installed a set of TCE plenum spacers that I scored from matt while we hung out. They work great.

[tw0123]

I'm jealous of you guys well your running cars lol... I'm still waiting to meet Paul for a retune and still have tons of body work to get done... too many projects on the go and my wife says the house is priority one now after 5 years of renos haha!

[AleroB888]

Took another step toward completing my gen1 Alero sunshade pattern :p

http://i493.photobucket.com/albums/rr299/Gflash01/snazzy/shade-blue-white_zpsa18082a2.jpg

[Papa Rad17]

What material are you using? I'm really starting to like the look. :thumb:

[sleepyalero]

Nice B. Though its more of a mustang thing. And not 100% fond of the look. But your cars! I still like the cars either way.

[AleroB888]

What material are you using? I'm really starting to like the look. :thumb:

The look varies a lot with the angle of the sun, the angle and distance viewed from the car, and the refraction of the glass. Those cars are out in the sun a lot, I needed to get some protection on them now, but there's still improvements that can be made. Every time I finish one I find things that could have been done better. Right now, I'm working with standard foamboard, researching more durable laminates. And now I think I have a way to eliminate the steps along the center. The foamboard tends to warp, so the cut and fit has to be perfect.

[TDavis]

http://i965.photobucket.com/albums/ae136/TiiZoXiC/010_zpsf8e15b85.jpg (http://s965.photobucket.com/user/TiiZoXiC/media/010_zpsf8e15b85.jpg.html)
http://i965.photobucket.com/albums/ae136/TiiZoXiC/011_zpseb264c07.jpg (http://s965.photobucket.com/user/TiiZoXiC/media/011_zpseb264c07.jpg.html)
http://i965.photobucket.com/albums/ae136/TiiZoXiC/001_zpsac58c9c5.jpg
http://i965.photobucket.com/albums/ae136/TiiZoXiC/004_zps5c26d6c7.jpg

[sleepyalero]

Looks like shit, therefor you should feel like shit. ;)

[TDavis]

Looks like shit, therefor you should feel like shit. ;)

I know right :awesome: . The missing door panel is annoying me

[sleepyalero]

I bet it is lol

[Papa Rad17]

Ya not sure how I feel about the door panel missing... Otherwise not to bad. but, that door...

[rocketfast321]

Yep
http://i187.photobucket.com/albums/x311/rocketfast321/alero/2014-08-27070620.jpg

[mfuller]

Well, my car has been at my TLM (trusted local mechanic) since Tuesday. .
I told him to replace the passenger-side axle (not the intermediate shaft) due to a torn CV boot, and adjust the parking brake actuators (my parking brake did not work too well - kinda important with a MT; I don't like leaving the car in gear when parked). Getting the parking brake sorted was no big deal. But....
Why replace the entire axle? The new axle comes with a warranty for $30 more, while a boot replacement would have no warranty.
Since my car's such a Frankenstein at this point, I told him the exact application that the axle is from (a 2006 Pontiac G6 GTP with a 6-speed manual). After trying 4 different axles, they couldn't find one that fit right (the length was either a smidge too short or to long, or the splines didn't fit into the hub nicey-nice), so he sent the original axle to a CV specialist to precisely measure it and find a compatible replacement, or rebuild it.
Not able to find a replacement, he went about rebuilding it. A good thing too, since the tripot was apparently full of little shards of bearing material, so the axle would have eventually failed anyway. I hope to get the car back today.
So I'm wondering now if I should pull both axles this winter, and send them to the Driveshaft Shop for replication as a stronger unit?
Which also begs the question, since my car's such a hodgepodge of parts now, how much longer until my TLM refuses to work on it - especially since it's been tying up one of his racks since Tuesday afternoon???

[AleroB888]

I don't understand why the axles were not new on the tranny swap to begin with. Were they modded somehow to fit?

[sleepyalero]

Axles were new when trans was installed.

[[ion] C2]

drove it, just like I do every other day

nothing new yet... big list just sits there. need time and support from people to get things done.

[mfuller]

I don't understand why the axles were not new on the tranny swap to begin with. Were they modded somehow to fit?

It's fairly well documented that the driver side axle needs to be modified.
I'm a bit perplexed as to why the passenger side was failing.

[Papa Rad17]

C2;657134']drove it, just like I do every other day

nothing new yet... big list just sits there. need time and support from people to get things done.

get off your lazy ass and go work on your alero!

[mfuller]

Oil and filter change.
http://i641.photobucket.com/albums/uu132/matthew_fuller/73932447-3A33-4DE5-9638-D6797B6E03F0_zpszyjkkkei.jpg (http://s641.photobucket.com/user/matthew_fuller/media/73932447-3A33-4DE5-9638-D6797B6E03F0_zpszyjkkkei.jpg.html)

[Papa Rad17]

Got a dual sub off a friend for $15, barley used. Tossed it a box that was in my closet and wired to the unused 2 channels on my amp(eventually for the front speakers) and bam, cheap bit of bass! Still have a bit more tuning to do though. I would never usually put such a cheap speaker in my car but I couldnt pass that up, by far the best 15 bucks I have spent. We'll see how long it lasts.

[Papa Rad17]

Picked it up from getting the front of the exhaust worked on this time, will get some pictures later. Already loving it

[aleros_eat_rice]

Replaced ignition lock cylinder. Needed to wiggle the old key around to get it to start. Just for laughs, I called the dealer and asked for prices. Here's how that went:
Me: how much would it cost to have the ignition lock cylinder replaced?
Dealer: $550, including parts and labor.
Me: what if I had the part already?
Dealer: we could take off $225, to bring it down to $325.
Me: what if I had the part, put it in, and you guys just did the security relearn?
Dealer: if you did that and had it towed, we could do the relearn for $125.


Ok, so $125 for you to turn a key and sit in my car for 10 minutes? Nah, I'll do it.

[AleroB888]

A lower angle of sunlight, slight gap on sides near top corrected for louver on blue car...

http://i493.photobucket.com/albums/rr299/Gflash01/snazzy/louvers-gen-1_zpsdb0da473.jpg

[Papa Rad17]

^that is a great picture. Loving the look!

[AleroB888]

^that is a great picture. Loving the look!

Thanks... I've got some things yet to improve on the pattern, but have other projects going right now.

[sleepyalero]

Bought me a new windshield defrost panel. Mine was very faded, and scratched, and i broke a vent on it trying to stop a dash rattle, but went to JY found one mint, great color, no scratches, or fade.

10$ and i walked out. :)


http://i921.photobucket.com/albums/ad58/natesalero/6C459CC6-62EA-4B9F-849A-FB29427EB49E_zps5lavrlii.jpg (http://s921.photobucket.com/user/natesalero/media/6C459CC6-62EA-4B9F-849A-FB29427EB49E_zps5lavrlii.jpg.html)

[Papa Rad17]

Im mad bro. I can never find anything that good!

[sleepyalero]

Always get lucky it seems. Next i need to find a good set of carpet. Mines nasty.

[Alerojester]

Replaced the driver side fog light on my sedan, and I work at a salvage yard so parts are rather easy to come by there's a few still in decent shape but most of the Aleros are gutted or just plain out totaled makes me sad to see them all crumpled up

[Seorsum]

I changed my radiator. Accidentally broke the old one trying to remove the upper hose to fix a leak. 14+ year old plastic just crumbled away. New radiator and new hoses now, I think it was due.

[mfuller]

Drove to Ben's (of WOT-Tech fame) place and got Frankenstein tuned.
Yes, it's fast.

[sleepyalero]

You drove to florida?!

[TDavis]

Cuz I like to pop in every once in a while.



https://farm8.staticflickr.com/7462/15040098693_d887c2dd6c_h.jpg (https://flic.kr/p/oV3rmr)001 (https://flic.kr/p/oV3rmr)

[sleepyalero]

Aleros only.

[TDavis]

Aleros only.

Fite me irl

[Papa Rad17]

its a nice looking n body... close enough for me. I like to see what other people do. How else would we know how terrible gagt side skirts would look with the door piece removed?