OFFICIAL: What did you do to your Alero today?

[sleepyalero]

Fite me irl

Why dont you let the cars do the talking? ;)


Papa, im joking... I always give tanner a hard time. Even over on gagt.

[aleros_eat_rice]

New pads & rotors. Next will be new calipers, just to be sure

[Papa Rad17]

^sounds familiar. lol. and I figured nate, but I was completely serious.

[Garfield]

Got parts from PNP to mostly put the car back together: Rear bumper reinforcement, absorber, brackets, screws, and bumper cover. Frame rail end piece is on order, once it comes in it goes in to the shop for surgery.

I even managed to find a bumper cover in fairly good shape that was the same color, so no painting needed! :)

[Papa Rad17]

Sounds like it will live again!

[mfuller]

Starting this past Saturday, November 1st, I parked my Alero in the garage for the winter. I need to get some RaceRamps tire cradles to keep the tires from flat-spotting over the next 5 months.

[tw0123]

Lol mine sit on jacks to prevent that.... but i like the concept of those ramps... i may have to look into them ;)

[ThaRev]

Got my windows tinted today 32% legal ceramic just dark enough looks good.

http://i1375.photobucket.com/albums/ag480/ThaRevPhotog/Mobile%20Uploads/IMG_20141104_174837_714_zpsf6a47475.jpg

[Papa Rad17]

Looks very good. your car is so... stock, and clean. I dont see that combination around here much. I like :thumb:

[Garfield]

I dropped our Alero off at the body shop today to get the rear end fixed up.

[aleros_eat_rice]

Ran mmo thru the pcv line. Made a good smoke screen for a couple of minutes, but has much sharper throttle response.

[Garfield]

Took delivery of our "new" Alero. 2004 GLS Final 500. You can't tell from the picture, but it is filthy from it's ride on the truck.

[Papa Rad17]

Very, very nice. Keep her clean! what #?

how much for the headrests? :lol:

[That01Olds]

Congrats on the purchase of your Final 500! Very nice indeed and X2 on what # lol?

[Garfield]

The head rests aren't for sale, sorry! :p

It is number 362.

[tw0123]

Wellll it's been a good bad good bad day for my car....
good - got part one of three pieces of the spoiler on
bad - tried to get her started, plugs were all backwards
good - got a new tune with Paul (mmgt1) --> very good part!!!
Bad - just as Paul's loading the last update i noticed my volts had dropped to 9... uh oh.... go to restart the car and it wouldn't go... finally got her going and just barely made it home... had to push it in the driveway.... top it off there's a fuel leak and pretty sure the alternator is toast....

A big thank you to Paul for making the trip up to tune!

[Garfield]

how much for the headrests? :lol:

I think I know where you can get a set for about $3,400. (Of course they come attached to a whole car. :lol:)

[sleepyalero]

Nice shit! Im in the process of pulling a motor still.

[That01Olds]

The head rests aren't for sale, sorry! :p

It is number 362.

Nice man. Congrats again!

[MMGT1]

Wellll it's been a good bad good bad day for my car....
good - got part one of three pieces of the spoiler on
bad - tried to get her started, plugs were all backwards
good - got a new tune with Paul (mmgt1) --> very good part!!!
Bad - just as Paul's loading the last update i noticed my volts had dropped to 9... uh oh.... go to restart the car and it wouldn't go... finally got her going and just barely made it home... had to push it in the driveway.... top it off there's a fuel leak and pretty sure the alternator is toast....

A big thank you to Paul for making the trip up to tune!

Glad I came out too man!! I don't know how your wires got so messed up. Not a single lead was on the right plug...lol With the amount of work done this year the issues you have a so minor. Once you get that alt figured out, whether its the alt or wiring and find that leak your golden man. Sounded really sweet with that Corsa, nothing like it that Ive herd!! Your suspension upgrade felt spot on as well... shes getting there~~!

[tw0123]

Thanks again Paul! It's was an awesome day overall :)
I've got some time to get all the trouble shooting done, not going to rush anything!

[Garfield]

We got the '00 Alero back from the body shop today, I'll have to give it a good once over in the daylight, but it looks like he did an excellent job of un-totaling it for less than 20% of what the insurance company estimated. (He did use parts from PNP, that I supplied, and didn't completely repaint everything so there are some chips where the body panel hit the trunk lid, but hey for not very much money we kept a perfectly good Alero out of the junk yard.)

Of course now that we got the '04 Final 500 I'm not sure what to do with the '00, we don't really need a second one.

And something I noticed but will have to verify, the '04 Final 500 drives significantly different, maybe it is because of fewer miles, i.e. less wear and tear, but the steering seems tighter and the suspension firmer. (And it sounds much nice, a more deep growl. I swear our '00 doesn't sound like that.)

[03glgold]

We got the '00 Alero back from the body shop today, I'll have to give it a good once over in the daylight, but it looks like he did an excellent job of un-totaling it for less than 20% of what the insurance company estimated. (He did use parts from PNP, that I supplied, and didn't completely repaint everything so there are some chips where the body panel hit the trunk lid, but hey for not very much money we kept a perfectly good Alero out of the junk yard.)

Of course now that we got the '04 Final 500 I'm not sure what to do with the '00, we don't really need a second one.

And something I noticed but will have to verify, the '04 Final 500 drives significantly different, maybe it is because of fewer miles, i.e. less wear and tear, but the steering seems tighter and the suspension firmer. (And it sounds much nice, a more deep growl. I swear our '00 doesn't sound like that.)

I would run up the miles on the '00 if it isnt too expensive. Keep low miles on the final 500 as long as possible. Why ruin the aleros that are already collectables.

[Papa Rad17]

We got the '00 Alero back from the body shop today, I'll have to give it a good once over in the daylight, but it looks like he did an excellent job of un-totaling it for less than 20% of what the insurance company estimated. (He did use parts from PNP, that I supplied, and didn't completely repaint everything so there are some chips where the body panel hit the trunk lid, but hey for not very much money we kept a perfectly good Alero out of the junk yard.)

Of course now that we got the '04 Final 500 I'm not sure what to do with the '00, we don't really need a second one.

And something I noticed but will have to verify, the '04 Final 500 drives significantly different, maybe it is because of fewer miles, i.e. less wear and tear, but the steering seems tighter and the suspension firmer. (And it sounds much nice, a more deep growl. I swear our '00 doesn't sound like that.)

does it run and drive? how much? I need a parts car, things im looking for
coupe, sunroof, spoilerless trunk, good hood, good headlights, good interior, preferred with 2.2. very interested, pm me some details if your looking to part with it. I have a friend wanting to drive it winter before I retire it if it is like it sounds. Let me know!

[tw0123]

sooo... before I decided to rip the alternator off and take it in to have it tested, I asked my mechanic next door if he had any way of testing it on the car... he came over with his multimeter and started poking around... and yeah.... the pigtail was unplugged!! she charges great now!
next issue was an exhaust leak that we noticed as well... looks to be coming from the donut gasket on the cross over pipe on my headers... and the smell of gas... well its looking to be from the return line at the tank...
so overall, im happy cuz it seems to be minor, easy fixes so far, then I can worry about the body work!
and then it had to go and snow tonight :( so much for going for a cruise!

[Papa Rad17]

Glad to hear its coming along!

[Fabian_7s]

I got a new battery and got brighter headlights. No pictures of it tho :(

[Oldsman]

what the latest is on mine. finally got one on. Also got the rust all fixed.

[tw0123]

That looks good Scot! How did you attach it? I see you cut off the piece they meant to be used... almost looks like you used a panel bond to adhere it directly to the car...

[Oldsman]

That area they meant use or whatever you call it is worthless. It is so thick it won't sit right against the car. They seem to have thought the skirts were suppose to be major cocked on the car. I must not have sent pics in Spanish when they were designing.
We had to add steel to give it a place to sit and attached there. Going to make up brackets for underneath the rocker for added support.

Due to poor fiberglassing just attaching in 3 places, middle and ends won't be durable enough.

[Shy]

I installed a new alternator and serpentine belt today.

[rocketfast321]

Oil change. 5-speed and ramps don't work well with me.
http://i187.photobucket.com/albums/x311/rocketfast321/alero/2014-11-20115019.jpg

[Papa Rad17]

Went to Indy today and picked up some of them there headlight covers. Sleepy tuned me up so no more SES light in my face for the 02, rev limiter is perfect, and we can see where it tops out sometime now :posi:
Thanks again, second time we got everything. Got better mileage on the way back and if something was going to come back on, it would have by the time got back I imagine. Cluster looks so nice without that damn thing and I can tell if I break anything now.

[S8track16]

Went to Indy today and picked up some of them there headlight covers. Sleepy tuned me up so no more SES light in my face for the 02, rev limiter is perfect, and we can see where it tops out sometime now :posi:
Thanks again, second time we got everything. Got better mileage on the way back and if something was going to come back on, it would have by the time got back I imagine. Cluster looks so nice without that damn thing and I can tell if I break anything now.

I am very jealous right now. I need a set of those covers!!

[Papa Rad17]

I am very jealous right now. I need a set of those covers!!

They look even better on my car then just seeing them :coolio: Sleepy seems to be able to find all this fancy stuff, I never have any luck. Ebay at one time had one side as well.

Changed my oil today. I tried running about 1/3 the recommended amount of seafoam on the way back sunday, in the oil. Had done the other treatments several times to date over the years but never in the oil before. Granted, this is only the second change (1st when I got it, full synthetic oil, 1 quart lucas) and a good 10,000 miles later I got a good bit of crud out of there. We drained and refilled about 3 fresh quarts to flush through, idled for about 15 min back up to steady running temp, then dumped and cleaned everything very well. I refilled with full synthetic again like always, no additives. 75 miles later everything is running tip top and the oil still looks as fresh as when it got pored in. No horror stories yet, leaks or anything terrible. Not that I've seen many but- I've never seen a 200,000 mile motor run fresh oil for a good drive like that and check still so clean. I'm very curious to see what happens from here.

[sleepyalero]

No problem. Thanks for the brake cleaner haha

And i have one more set (for babyblue)

One of these days ill have to look for more and s8track you will have first dibs.

[S8track16]

Sweet, can't wait.

[Papa Rad17]

No problem. Thanks for the brake cleaner haha


no prob. Light still off, finally got try the speed limiter though, still tops at 107-8. Probably a good thing for now anyway. :lol:

[Redog]

Redog went into the garage today. Not for the winter though. My recall appointment is January 7th. After that, going to the car wash, top off the gas tank, Stab-le the fuel, overinflate the tires, then see you in May :cool:

[Babyblue]

No problem. Thanks for the brake cleaner haha

And i have one more set (for babyblue)

One of these days ill have to look for more and s8track you will have first dibs.

haven't been on here in a while...Thanks for remembering! I will be looking at getting those very soon!

[S8track16]

What year and model of Alero did those headlight covers come on?

[tw0123]

99 model year... I'm not sure if it was a specific trim level....

[Papa Rad17]

99 only. I believe it was either just an option or GLS package thing.

[aleros_eat_rice]

Got a new cat. The old one decided to break where the pipe meets the rear manifold. Got a Magnaflow.

[ffs]

i've been working on cleaning up a bit. i removed my pinstripes that i put on (it felt like too much and they were just annoying, plus it'll be one less annoyance for the future paint job.)

i also installed a magnaflow muffler. it gives off this low rumble while idling and cruising, it's lovely. it also removed the heavy and cumbersome mess that is the stock muffler.

i have more cleaning to do tomorrow...since it's gonna be 50 - 60 degrees here tomorrow i may as well make the best of it before winter actually starts.

[S8track16]

Changed the valve cover to the powder coated green one today.
http://i1314.photobucket.com/albums/t573/S8track16/Mobile%20Uploads/2014-12/20141229_155709_zpszbafbpkb.jpg (http://s1314.photobucket.com/user/S8track16/media/Mobile%20Uploads/2014-12/20141229_155709_zpszbafbpkb.jpg.html)
http://i1314.photobucket.com/albums/t573/S8track16/Mobile%20Uploads/2014-12/20141229_163959_zpsaf9wwdpa.jpg (http://s1314.photobucket.com/user/S8track16/media/Mobile%20Uploads/2014-12/20141229_163959_zpsaf9wwdpa.jpg.html)

[Papa Rad17]

mmmm, nothing like a nice clean ecotec. I like the bay!

[dowens1233]

Washed her. Isn't she purdy?http://i1081.photobucket.com/albums/j360/dowens12331/Mobile%20Uploads/IMG_20150125_135018_zpsl6tbgijo.jpg

[Oldsman]

Looks good.

Let's see what have I done with mine.........order CF roll.

[tw0123]

Nice Scot! Real CF or a vinyl overlay? I'm guessing the real stuff :)

[Oldsman]

The real stuff

[Garfield]

Made a PnP run to get some parts.

Why do people say you can replace the passenger airbag cover? It looks easy to do to me...

Did somebody say they needed a grey accessory lighter outlet?

[That01Olds]

Made a PnP run to get some parts:
http://www.aleromod.com/forums/attachment.php?attachmentid=12537&stc=1&d=1422785628

Why do people say you can replace the passenger airbag cover? It looks easy to do to me?

Did somebody say they needed a grey accessory lighter outlet?

IIRC, I believe Vella's Alero was looking for the outlet from the passenger side foot well area.

[Papa Rad17]

I was searching hi and low for one of those passenger lighter outlets. I had finally got my hands on one a while back.
I ordered a new tps today from rock auto, and cleaned up the old girl a bit. Cant wait for it to warm up so I can back to work on it.

[number53alero]

Got some replacement backup parts for my F500 Alero. Found the needle in a haystack! Got the leathers and back seats. Even the headrests that Papa Rad17 wanted to buy! They could use some cleaning but that's normal from a J/Y. The driver's seat bottom came but has a rip in it at the seam. It might be sewable but I got a good deal on it all.
http://imagehost.auroraclubna.com/images/10957354889730921048.jpg

http://imagehost.auroraclubna.com/images/10959607889730901048.jpg

[tw0123]

Awesome find!

[Papa Rad17]

Are you saying those headrests are for sale?

[Garfield]

Are you saying you found a Final 500 in a junk yard? Very Nice!

[number53alero]

Found it online and ordered the parts shipped to me. The place is over 10 hours from my house, too long of a drive. From what I gathered the car had just over 100k on it. PM me on the headrests Papa, might sell them for the right price.

[Papa Rad17]

Got my TPS replaced, old girl idles nice and smooth again and starts good n strong. Problems fixed from http://www.aleromod.com/forums/showthread.php?t=38327 Now, she needs a bath, real bad.
and sending a pm right after this.

[Papa Rad17]

I settled for some grey leather grandam gt headrests I finally found cheap. Just got them in, still getting used to the different look but I like um! Once I decide if the seat-belt holders will go back on or not I'll get some more pictures up. Here is a teaser, Not being able to see the rest of the grey interior they do look a little out of place in pictures. In person, I like, very much. The seats have a different 'posture' if you will and I just simply prefer the design.

[Netuddki]

I got my OEM Oldsmobile trunk logo from the US today and I have put it on. I think, I did a good job.

I ordered the front logo too and the "Oldsmobile" text for the trunk. If I receive them, the "Chevrolet" logo and letters come off finally.

[sleepyalero]

I settled for some grey leather grandam gt headrests I finally found cheap. Just got them in, still getting used to the different look but I like um! Once I decide if the seat-belt holders will go back on or not I'll get some more pictures up. Here is a teaser, Not being able to see the rest of the grey interior they do look a little out of place in pictures. In person, I like, very much. The seats have a different 'posture' if you will and I just simply prefer the design.




You need leather seats to fully pull that off, it looks very odd with clothe/leather mixed. Do a full leather interior swap!

[Papa Rad17]

I could afford the head rests, but that's out of budget right now. Rather than swapping stuff I want to just get it all professionally done red/black one of these days. But like the other big plans, that's a long way off. The grey leather matches all the grey pleather and panels perfectly, I really don't think it looks to bad. I'm also finding out they are more comfortable.

[sleepyalero]

Yeah, i just ordered my new F40 transmission! Should be here tuesday!


Then i need to contact milzy to get headers. And then order a new clutch.

[rustyballs_69]

Swapped in a 3500 to replace my worn out 3400. I had a misfire on cylinder 1 that was from something mechanical, bent valve, bad piston rings, cracked head. Not exactly sure yet, haven't torn it apart yet.
http://i1373.photobucket.com/albums/ag398/Michael_Griesenauer/Mobile%20Uploads/2015-02/20150226_124826_zpsaktc8tch.jpg (http://s1373.photobucket.com/user/Michael_Griesenauer/media/Mobile%20Uploads/2015-02/20150226_124826_zpsaktc8tch.jpg.html)

[sleepyalero]

Nice! Good to see your car is still kickin.

[Papa Rad17]

Nice! Good to see your car is still kickin.

X2. and that looks nice with the flat black!

[rustyballs_69]

Nice! Good to see your car is still kickin.

X2. and that looks nice with the flat black!

Thanks guys. Papa wait till I post a picture of what the color was before the flat black.

[03glgold]

A drive to clear my head turned into a 3-400 mile loop looking for suburban's/ yukon xl's to replace the one my parents rolled yesterday. They hit black ice and while the suburban is not fine, my parents only sustained bumps and bruises. While I was in Stockton, Ks I found this old oldsmobile dealership
http://i1327.photobucket.com/albums/u661/03glgold/Mobile%20Uploads/20150301_104018_zpssk6nxd8r.jpg

[dowens1233]

got an oil change from the dealership

[tw0123]

I put mine up for sale... just came to the realization that as much as i love it i just don't need the third vehicle and could always use the extra cash...

[S8track16]

Which one?

[tw0123]

The silver 5 speed... I'm not in a hurry to dump it, if it doesn't sell then I'll strip it and keep the manual bits for a swap in misty... :)

[dowens1233]

http://i1271.photobucket.com/albums/jj633/dowens1233/IMG_20150305_211347.jpg (http://s1271.photobucket.com/user/dowens1233/media/IMG_20150305_211347.jpg.html)

[Papa Rad17]

Finally had some nice weather and I got the bumper off and put on my mesh I've been hauling around all winter, and finally got the rest of the factory intake out. stickers have been on for a week or so now, but, enjoy.

[Netuddki]

replaced Chevrolet badges with Oldsmobile.
Messed up a bit, but I will fix that later, when I make a paint job in the summer.

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/11045345_10206126143975923_3330222805273514394_o.j pg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/11025259_10206147733875657_656743088410966378_o.jp g

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xpt1/t31.0-8/11063899_10206147734555674_3936815832221369996_o.j pg

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xfp1/t31.0-8/11046956_10206147735995710_7763633591562450560_o.j pg

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/1957902_10206147816837731_4489309212898428607_o.jp g

[Papa Rad17]

Much more proper. I always thought the chevy badges looked odd on it.

[Netuddki]

Yeah, The chevy logo was ugly with that black plastic oval plate and I wanted it to be like the original, because I had the Oldsmobile logos on the wheels and on the steering wheel. Now everything fits well together.

[Papa Rad17]

I got the dent in my drivers door popped out today. Looks so much better and thus far fitment seems better. Really enjoying this nice weather.

[Netuddki]

Passed yearly inspection successfully.

[ffs]

canuck springs

http://i.imgur.com/SdjEzhVl.jpg

[Papa Rad17]

:thumb:

[number53alero]

I replaced the starter on Tuesday. Lasted 11 years and 107k miles. Wasn't too bad to replace street-side sitting on two jack stands. I did find that small plastic sheild that covers the gap by the flywheel super annoying, they could have left it flat and not covering the bolts by 1/4"...

[sleepyalero]

Still on stock starter... Lol 14 years and 215k miles and going.

[Papa Rad17]

Thursday-Full synthetic oil change, re-fitted the new rack and pinion, checked fluids and rotated tires/pressure. Today- New LED's in gauge cluster, fixed the brights and cruise indicators I had previously made to bright. Think it's ready for the trip on Monday now...

[ffs]

my drivers side window fell in ffs. i have to replace the regulator

[Papa Rad17]

Sure it didnt just come off the crappy plastic clips? may just need some gorilla glue, or zip ties if they broke.

[Netuddki]

my drivers side window fell in ffs. i have to replace the regulator

That's probably just those plastic clips sliding in the splints. You get that for $5-$10 in double package on ebay.

I wouldn't glue them because I can assure you that it won't hold.

For example this (http://www.ebay.com/itm/Left-Window-Regulator-Guide-Clips-Pontiac-Grand-AM-Driver-Side-Clip-Front-99-05-/111117830775)

[Nas Escobar]

Those sash clips are annoying. I had to take my window out the door to fix it.

[Shy]

Installed rebuilt fuel injectors (3.4L). Big help from a friend, but easier than I thought.

[Oldsman]

What have I done........

[tw0123]

Looks beautiful Scot! I know it's only a teaser but i can see how smooth it came out!

[03Alerosil]

I sanded and painted the bottom of the inside of my rear doors where rust was developing. My Alero is a driver but I don't want it falling apart from rust. Oddly enough that is the only spot on the car with rust. That will change once I move up to Michigan.

I also fixed a tire. Brand new tire with a nail in it cuz my neighbor is a roofing guy and lazy about picking his shit up.

I tweaked the settings on my amp for my subs as well.

[sleepyalero]

What have I done........

What is that to????

[Papa Rad17]

What is that to????

I have been wanting that answered as well...

[tw0123]

Scot, you're making Nate a cf cowl hood right? Lmao!

[03Alerosil]

It either looks like an exhaust flex joint or some kind of fabric

[sleepyalero]

Its carbon fiber

[Oldsman]

LOL.......it is body panel but more to come. Oh and no cf hood for anyone. More to come

[sleepyalero]

Better be done before the show!

[bdyman]

It either looks like an exhaust flex joint or some kind of fabric

wow your a rocket scientist
dont none of yall worry bout what is being done to his
when its done you will see it

[bdyman]

Better be done before the show!

dont you worry bout when i finish
this is my final masterpiece
when its done its done
so shut your cake hole boy

[tw0123]

Lmao^^^^ Chris you're awesome!

I'd love to have you fix my car but i know i cannot afford your skills... we should talk about my hood though and if it can be fixed and what that would cost....

[bdyman]

Lmao^^^^ Chris you're awesome!

I'd love to have you fix my car but i know i cannot afford your skills... we should talk about my hood though and if it can be fixed and what that would cost....

my services are as followed
answered questions online are 25 per hour
body labor 75 per hour
i come to your house 75 per hour plus traveling expensies
to give a response on this site is 25 per hour
i take all forms of paypal
thank you for your coperation

[sleepyalero]

My statement still stands!

[bdyman]

so does mine
when its done its done boy

[sleepyalero]

Yes dear!

[tw0123]

http://i1371.photobucket.com/albums/ag311/tw012379/20150426_164017_zpstxyqjces.jpg (http://s1371.photobucket.com/user/tw012379/media/20150426_164017_zpstxyqjces.jpg.html)

We're getting close....

[Papa Rad17]

Looking good! I'm glad you have you have the spoiler with it, I love that osv spoiler. I know it and the skirts are apparently the worst, looks like you've made a ton of progress.

[tw0123]

Both skirts are on, still need a boat load of Bondo to smooth it all and still have the outer pieces of the spoiler to attach

[Papa Rad17]

progress! looks like you got the bumper fitment good though!

[tw0123]

It's not perfect but i never thought it would be given I'm doing all the work myself.... seeing ad this is the first time I've ever attempted something like this.... BIG learning curve lol....

Hopefully it turns out respectful when I'm done, either way i can say I'm one of very few with the osv kit and mine will be complete....


now if only i could find a set of the osv rims to finish it off....

[bdyman]

i would post a pic of scots car
done the correctly and blah blah blah
but nope
its not ready
if you need advice
my post above states,my fees,for advice
i take all form of paypal

[Papa Rad17]

Keyless entry installed! The unit is ready for when I feel like tackling the remote start as well, that'll be fun.

[tw0123]

The waiting game begins....

http://i1371.photobucket.com/albums/ag311/tw012379/Mobile%20Uploads/2015-05/20150506_214449_zpsfpg5msyy.jpg (http://s1371.photobucket.com/user/tw012379/media/Mobile%20Uploads/2015-05/20150506_214449_zpsfpg5msyy.jpg.html)
http://i1371.photobucket.com/albums/ag311/tw012379/Mobile%20Uploads/2015-05/20150506_214535_zps5ntkkqwq.jpg (http://s1371.photobucket.com/user/tw012379/media/Mobile%20Uploads/2015-05/20150506_214535_zps5ntkkqwq.jpg.html)

[sleepyalero]

Good lord lol

[tw0123]

Lmao yup.... warped way off had to heat it up like crazy to get it to fit then clamped it to allow the panel bond to set.... hoping to remove the clamps tonight then start with the filler to blend it all in....

[tw0123]

http://i1371.photobucket.com/albums/ag311/tw012379/Mobile%20Uploads/2015-05/20150507_212105_zpsi3pzshvp.jpg (http://s1371.photobucket.com/user/tw012379/media/Mobile%20Uploads/2015-05/20150507_212105_zpsi3pzshvp.jpg.html)

Full kit is now installed.... time to smooth and paint and enjoy!

[Papa Rad17]

Beautiful!

[bdyman]

OMFG
i cant believe what im seeing

[tw0123]

Then don't look.... i don't have 10 grand to have someone do my work... I'm sure your first job wasn't perfect either.... i haven't been doing this for 20 years.... oh yeah btw I'm not done.... no reason to be so bloody cynical... i thought this forum was to help each other and offer advice not just make rude comments because we all aren't doing things your way or just taking it to a body shop to pay someone....

[03glgold]

Then don't look.... i don't have 10 grand to have someone do my work... I'm sure your first job wasn't perfect either.... i haven't been doing this for 20 years.... oh yeah btw I'm not done.... no reason to be so bloody cynical... i thought this forum was to help each other and offer advice not just make rude comments because we all aren't doing things your way or just taking it to a body shop to pay someone....

He is kinda pissing me off. We have low numbers on the forum anyways and then he comes and treats everyone like crap and then nobody will want to be on the forum. Everybody knows that bdyman hates people to do stuff themself, but he used to make useful comments instead of only using derogatory statements. I dont know what is going wrong in his life that he is so pissed off about, but he should find another outlet for his anger.

[03Alerosil]

Yea bdyman is an ass. Not everyone is a body guy and we do the best we can. I would match rather see someone with a project they put the time into rather than being raped at the body shop. This forum is to help people not be rude and criticize.

[AleroB888]

You'd be an ass too, after 20 years of paint fumes :blink:

[Papa Rad17]

this page- :splatter:
Yea bdyman is an ass. Not everyone is a body guy and we do the best we can. I would match rather see someone with a project they put the time into rather than being raped at the body shop. This forum is to help people not be rude and criticize.

X2. When I get a new dd and the alero is put aside (hopefully later this year) I'll have post a bunch of pictures of my body work. Molding on the razzi spoiler and rust repair in the garage with mid-grade materials and nearly 0 experience. He'll have a stoke! :lol: But hey, how the heck else am I supposed to learn? Like everyone else I'd rather save the money and have the enjoyment and learning experience of doing it myself. We know it won't be perfect. There are only a few aleros on here that are really worth shelling out the thousands for professional body work anyway. Like Tim I'm pretty confident I can turn out something pretty decent myself.
Glad to see it coming along Tim! :thumb:

[bdyman]

lmao!!!!!
fuckin kids these days
why should i give my advice
its pointless really
doing what i do for a living cant be taught online cant be taught in a fucking youtube video
and btw my life is fucking awesome so suck a fat cock

ya i see one huge mistake you made in bonding tje wings to your car
mistake is
you should have shaved them down bevel the edges down your gonna have so much filler work that its gonna shrink and die,back on ya
but hey what do i know right

[03glgold]

See your last bit was useful. My 65' tbird which I care about being done proper is at a professional shop. My alero should roll over 200k next week, so there is no real point spending the big bucks to make it perfect. In perfect condition my car is worth less than $2k. That leave the two feasible options being to leave it looking like total shit, which it does from quite a distance.The other option is to fix it myself so the normal every day person likely doesnt notice anything at all or if they do they have to be looking close.

[Papa Rad17]

I don't think a single person has questioned the fact that you know what your talking about bdyman. Enough valid points have been made, everyone gets the picture on both sides of this //////////////////////////////

I can't help but feel we've gotten off topic... What I do to my alero today?
I drove it, check fluids, put gas in it, about to go drive it again. Getting ready to roll over 208xxx miles on my to my interview this evening. If I get the job I will hopefully be bringing home a new car next week so the alero can finally go rest on some jack stands while some much needed work gets done, if not until after homecoming. poor thing is showing it's age...

[number53alero]

I finally got my recall done! Least I got a free car wash out of it..

[ffs]

What did I do to my alero today? I took my plates off of it and got it ready for the tow truck. Took all of my aftermarket off of it to use for the future (or sell)

Why? I got slammed in the rear on the highway. Not at fault. Damage to the unibody and wrinkled lots of the lower trunk frame. Wasn't worth putting the money into it to get it drivable again. Even though I loved my alero to death, I could move on to something a bit bigger and better with the money the insurance gave. I'm now an owner of a beautiful 2000 mustang. I'll get pics of both cars to you guys as soon as I can

[03glgold]

I thought you said bigger and better. A mustang is definately not bigger. Good luck with the new ride though and sorry about your alero.

[Papa Rad17]

What did I do to my alero today? I took my plates off of it and got it ready for the tow truck. Took all of my aftermarket off of it to use for the future (or sell)

Why? I got slammed in the rear on the highway. Not at fault. Damage to the unibody and wrinkled lots of the lower trunk frame. Wasn't worth putting the money into it to get it drivable again. Even though I loved my alero to death, I could move on to something a bit bigger and better with the money the insurance gave. I'm now an owner of a beautiful 2000 mustang. I'll get pics of both cars to you guys as soon as I can

Ha! I thought you said you wanted something better? Sorry to hear about the alero. I went mustang once... never again. Those things are sluggish pos's.

[ffs]

I've actually been pleased with driving it despite what you guys are saying. I've driven a few different types of cars and I've enjoyed all of them so I guess I just like driving lol

[tw0123]

I took mine all all part again Wednesday, fixed my fog lights, and figured out my gauges wiring glitches :-)

[xXManwhoreXx]

Not today, but my ex let her get towed to an impound lot and by the time they got a hold of me they wanted 3k for it... I got my stuff out of her and signed the title over... still really upset about it. They think the car was worth that much though.. so jokes on them

[S8track16]

I went to the autoparts store this morning at 10-11am, ordered a vent valve solenoid to hopefully fix my engine light, and a walker resonator pipe that connects the muffler and the cat since mine had holes.

The parts arrived at the store at 330pm, drove to my mechanics and got in right away, an hour later everything was done, engine light removed, and my exhaust is silent for the first time in 3 years.

[sleepyalero]

Not today, but my ex let her get towed to an impound lot and by the time they got a hold of me they wanted 3k for it... I got my stuff out of her and signed the title over... still really upset about it. They think the car was worth that much though.. so jokes on them

Whatever you scraped the car. Dont try to please everyone here!

[xXManwhoreXx]

Nope Nate, the crazy ex let it get towed from my old apartment (which I was still paying for) she told them I abandoned the car, I just didn't have room for two cars at my new place and was llanning to get the car that weekend to get all my parts off it so I could send them to everyone. I was going to just give you my wheels and motor, and sell the exhaust and stuff..

[aleros_eat_rice]

Tune up. Ac Delco wires, NGK IX Iridium plugs. First tune up in almost 70k miles. Going to change the oil tomorrow.

[03Alerosil]

I took off my Nebraska plates and put on my new michigan plates. Front look ugly with the bare license plate holder full of holes. Oh well. Time for a gimmick plate to cover it up

[aleros_eat_rice]

My HID ballast went bad this morning, and I had just gotten paid. I ordered the VVME 55w 8000k kit since I have the extra money.
Edit: Lights came in today. I'll post pics in my build thread.

[rustyballs_69]

New blower motor resistor. Not sure how the factory one lasted 184,xxx.

[zzyzzx]

Drove it. Was my first time since sometime last fall. :O

Car did just fine in the garage with a battery tender (trickle charge) left on it overnight one night per week over the winter. Also added some PAG150 and a can of R134a to get the A/C to work. Will probably replace the compressor at some point when I'm 100% sure it's the problem (I do think it's the typical V5 belly leaker).

[Oldsman]

Do I really have to tell ya

[Oldsman]

Now suck that, bitches

[sleepyalero]

Im gonna miss you in a few weeks.....

[bdyman]

and dats how i do it mutha fuckas

[Jordansalero]

http://i288.photobucket.com/albums/ll187/jordankonkul/a6379114-f559-4189-82dc-4f4c8a1ac5d4_zpsr8opqhj7.jpg

I tinted my tail lights with a few light coats of krylons custom lens crap from auto zone. it came out much better than i expected, i thought it was gonna look terrible

By the way, this is my first post! I decided i love my 190k alero that i've done plenty of mechanical work to. So i might as well start posting on these forums because they're dead as it is

[zzyzzx]

I fixed my cassette adapter so it isn't constantly ejecting. I followed instructions that I found on the internet where they removed some parts. Made a big difference.

Like this, except I remove 3 little wheels.
https://www.youtube.com/watch?v=ZCICzgs_3vE

For those who like pictures instead of YouTube:
http://www.instructables.com/id/How-to-cure-car-cassette-adapter-quotauto-revers/?ALLSTEPS

[Jordansalero]

I fixed my cassette adapter so it isn't constantly ejecting. I followed instructions that I found on the internet where they removed some parts. Made a big difference.

Like this, except I remove 3 little wheels.
https://www.youtube.com/watch?v=ZCICzgs_3vE

For those who like pictures instead of YouTube:
http://www.instructables.com/id/How-to-cure-car-cassette-adapter-quotauto-revers/?ALLSTEPS

Yeah i had problems with mine, so i just put a new head unit in, better sound quality i guess, and now i can use my aux cable for music :awesome:

[tw0123]

That is some great work Chris! I can sort of see what you meant about cutting the spoiler down to fit better before filling it in.... the blend on mine will be further down the side of the tail light due to how mine sits.... but at the same time, this is my first rodeo so I'll love it either way! :)

[Oldsman]

I am going for replica so lines and shapes are all based on the actual OSV. So whatever we have to do to match it, we do.

[Redog]

Took off my racing tires and factory wheels, and put my regular tires and wheels back on. :coolio:

[tw0123]

Scot, how much of a hollow does that leave the third brake light? It looks like it will be recessed about an inch.... is that an accurate guess or is it just an optical illusion the way thepicture is without the light in place?

[Oldsman]

It is recess some but not an inch. It's thicker on the top than bottom.

[Papa Rad17]

Wow Scott. wow. do I even want to know how many hours are in that?

[tw0123]

Thanks Scot! I figured it looked deeper than it is since the light isn't in there.... how close are you to paint?

[That01Olds]

Do I really have to tell ya

And to think the last time I saw your car it looked like this. I can't wait to see the finished product!

[Papa Rad17]

Ordered some parts, finished piping the intake down to the bumper, and drove it around the block. Lights came on like a hub is going bad... great.

[sleepyalero]

Ordered a 24" o2 wire extension from casper electronics. The MMS headers require me to add another extension in... Already got one from them back with my old set. But the wiring is pretty taunt and ran right above the rear header in the exhaust tunnel right now cause thats the only way i could get it to reach. So i got an extension so i can move the wire out from above the header and relocate it.

Its been fine. But i dont want to drive 4.5 hours to michigan in 2 weeks and melt my o2 wire. But with the hour drives ive done so far, i havent had an issue. So im just doing it to play it safe.

[bdyman]

Wow Scott. wow. do I even want to know how many hours are in that?

dont even want to know
perfection takes time

but i would have to say total work time about 2 months for the ass end

[bdyman]

Thanks Scot! I figured it looked deeper than it is since the light isn't in there.... how close are you to paint?

paint????
how about polyester primer which will sit for 2 weeks
im still working the cowl hood the rocker panel moldings
and i have to fix the front bumper
after polyester then i finish with spies hecker primer which will sit for 2 weeks
then i can final prep for paint
and i still have to finish the,carbon fiber work
sooooooooo im shootin for primer at the end of the month to answer your question

[tw0123]

Sounds good Chris.... i know you go beyond perfection and Scot's car will be your masterpiece.... i think i can say this from a bunch of us.... we really want to see this completed.... lol :)

[Papa Rad17]

Not today but, Saturday we got the stock manifold off, only broke one stud but a bolt extractor took it right out. 7 of the other studs pulled right out, 2 the bolt came off clean so we didnt pull those. We got the new studs in, thermostat replaced. and the new manifold on. Turns out I had to modify the brake booster vacuum line a pinch so we left the rest for next weekend. Hope to have all the other goodies put on and ready for exhaust by the end of the week.

[bdyman]

Sounds good Chris.... i know you go beyond perfection and Scot's car will be your masterpiece.... i think i can say this from a bunch of us.... we really want to see this completed.... lol :)

well when its done its done
im not rushing this build at all
his car has to be perfect and it will be

[Netuddki]

Got an A/C fill and desinfection.

[Shy]

New Rotors, plain EBCs.

[Papa Rad17]

I walked out to go to work today and one of my exhaust tips was gone, I dont know what to think about that. It looks strange with just a passenger side exit.
Drove it again. 2108XX miles now

[Valley olds]

Today was quite busy. I replaced the pipe behind my cat to 2.5 along with a glasspack to replace my resonator, put an oem ecotec emblem on the coil, and reinstalled my subs. In the past couple of weeks, i also replaced the brake booster and hub bearing.

[tw0123]

I looked at mine today.... it depressed me more... i haven't had time to work on her in almost 2 months now and it's not looking promising anytime soon either.... :(

[Valley olds]

I looked at mine today.... it depressed me more... i haven't had time to work on her in almost 2 months now and it's not looking promising anytime soon either.... :(

I know what you mean. When I dont have time for my alero, sometimes I just want to give up. After a little elbow grease though, it feels very encouraging.

[tw0123]

Lol I'm not giving up by any means.... just really wish i had time to work on her.... she's been off the road since Nov 2012.... I've driven her 3 times since

[Valley olds]

Lol I'm not giving up by any means.... just really wish i had time to work on her.... she's been off the road since Nov 2012.... I've driven her 3 times since

Wow that's a long time. When your project is complete though, I am sure it will be worth it.

[tw0123]

I'm hoping so! :)

[kadawg13]

I probably should have saved the money for something more important but I was really tired of the stock radio and the FM transmitter I was using really sucked, so last week I dropped the $130 for the wire harness with chimes and an install kit....
http://i115.photobucket.com/albums/n313/kadawg13/IMAG0212_zps4xjs4dec.jpg (http://s115.photobucket.com/user/kadawg13/media/IMAG0212_zps4xjs4dec.jpg.html)
http://i115.photobucket.com/albums/n313/kadawg13/IMAG0213_zps2xaliufi.jpg (http://s115.photobucket.com/user/kadawg13/media/IMAG0213_zps2xaliufi.jpg.html)
didn't notice how dusty that was until I just looked at the pics here.
the rest of today will be spent trying and get the screws for my air filter off....
http://i115.photobucket.com/albums/n313/kadawg13/IMAG0209_zpsfmlsdutg.jpg (http://s115.photobucket.com/user/kadawg13/media/IMAG0209_zpsfmlsdutg.jpg.html)

[tw0123]

Why is the deck out so far? I had the same deck in my car right flush with the bezel...

[kadawg13]

I couldn't get the mounting brackets to bolt to the deck with the bolts supplied and get it in the space. the bolts have a smooth head, no screw driver slot or squared edges for a wrench. so it's just kind of sitting there.
it took about 20 minutes to wire the harness, had to strip the wires for the speakers because it had RCA plugs but the harness for the unit has wires, not plugs.
took another 2 hours fighting with the thing to figure out I couldn't get the brackets on, then trying to fit all the wires in with the door chime unit hanging somewhere.....
I can push it in a little more flush but I just got tired of messing with it and gave up

[Papa Rad17]

fitting everything in behind the radio is a real pita. It takes a lot of crafty packing but it can be done.

[Garfield]

Finally got the front brake upgrade kit from MMS put on, boy is it nice to not have warped rotors. (And much better stopping power!)

I think this is how all Aleros should have been equipped. (Or at least GLS models.)

[dschroed]

Today, I vacuumed and cleaned out the car for the first time since I bought it. The previous owner left a TON of relays in the glove box. Possible previous electrical problems? Plan on conditioning the leather and looking into a non-working driver window tomorrow.

[Shy]

Installed a new window regulator, glued some brackets back together (on the door panel) as they seem to be getting a bit brittle.

[number53alero]

I went to the junkyard to get a replacement passenger airbag cover. They wouldn't sell just the cover so I had to buy the whole airbag for $50. Better than the stealership they could get one for $720!!!!!!! I swapped out the cover today as well, was an easy job.

[shinnick66]

Yesterday I repaired a brake line and glued the headliner back up. Today I put new swaybar ends on the front.

[Babyblue]

Got my double din put in her a few days ago http://i73.photobucket.com/albums/i238/Baby_blue1993/Mobile%20Uploads/VZM.IMG_20160228_143110_zpszx8wcjnn.jpg[/URL]

[tw0123]

I got new seats on Sunday.... Haven't looked into installing them yet... Still have some tweaking to do before they go in ;)

[falloutboy]

Got all stuff now to put back my interiom trim - now only need to have a bit warmer weather and some mood to put in back in.
And top off the washer fluid while Im at it :)

[Babyblue]

Getting my Windows tinted on the final 500 ..5% all the way around ;)

[rocketfast321]

Nothing at 168k. Cv axles need to be replaced after I flat spotted all 4 tires cuz I didn't fixed the abs wire. Details when I get at a computer.


Motor still great getting 22-24 mpg. My scan gage always say 27 at 75-80 mpg. Leaks oil somewhere and burns oil. Coolant leak at the water inlet. But it took me on a 800 mile road trip and was perfect.

[number53alero]

Got my double din put in her a few days ago http://i73.photobucket.com/albums/i238/Baby_blue1993/Mobile%20Uploads/VZM.IMG_20160228_143110_zpszx8wcjnn.jpg[/URL]

That's nice I miss my double din in my alero. The G8 GT has the climate controls built into the radio so replacing it would cost over $500 in parts alone..

[theirishpope]

I purchased cris2000 99 2.4 alero on sunday and drove it home. Today I touched up the paint on the front end temporarily with plasti dip until I have time to do a better job later on

[theirishpope]

Added a second can of plasti dip to the front number as well as starting glossifier coat. Also installed strut towet bars on both rear and front.

[Babyblue]

Few days ago...Took out the seats and center console, cleaned the stains in the carpet. Also Cleaned all the door panels and trim panels. Took care of the leather so its not so dry. I got my aftermarket speakers in there. Polk audio in the front and rockfordfosgate in the back.

[tw0123]

I took out my seats last night... I was going to take the console out too but was too lazy so I'm working around it haha also started to redo all my wiring as it's a mess...this could take longer than anticipated as i probably should just restart it all lol

[Shy]

Replaced the battery in my Alero with an Everstart Maxx. Consumer Reports rated it a best buy for the group number. I was hesitant purchasing such a critical piece of equipment from Walmart but I have seen them consistently over the years rated very high.

89 dollars - 5 year warranty

[1970cs]

Not so much today but last Sunday. Broke it out of hibernation, charged the battery (factory installed still going) changed oil, checked all fluids, complete safety check. While it was up in the air, cleaned the under carriage and engine bay of cobwebs/dirt. Touched up any undercarriage pieces that were developing rust? It's never seen snow/salt in it's lifetime so don't know why it's doing that.

Car was covered so no dirt, but used detailer with wax in it on the paint and polished wheels.

Pat

[number53alero]

I drove it around as it hasn't been driven in 2 weeks. I realized just how slow it is compared to my G8...

[zzyzzx]

I drove my Alero for the first time since early last winter. Started up and drive just fine. I think leaving it on the battery tender helped a ton.

[theirishpope]

Over the weekend I changed out a broken strut and recharged the ac on my 99, fixed a broken strap on my çv boot (added new grease) on my 01

[@mgaw23]

i changed all the brakes and put slotted and drilled discs and put a whole new stereo system in it! i also fixed the sunroof! its like a new car! drove with no radio for a whole year!

[Bahlzeron]

Installed a Cosmo Evolution short ram intake, however I didn't use the little Cosmo filter that came with it.. I got a giant (10.125in long x 6in round) Spectre on sale at O'Reilly Link to filter (http://www.oreillyauto.com/site/c/detail/SPT0/9731/N1887.oap?ck=Search_N1887_-1_-1&pt=N1887&ppt=C0388). Had to do a bit of head scratching and backwoods engineering to get it to fit (sri is something like 2-3/4in smallest ring on filter is 3in) I drilled my own hole for the temp sensor rather than adding length to the wire.... in retrospect I should have not used an auger/paddle bit that's meant for wood...hole ended up not so round..shoulda used the Dremel.. eh.. Gorilla Tape to the rescue! Which reminds me.. I forgot to plug the original temp sensor hole.

Yes, yes I know.. pics or it didn't happen :p

http://i35.photobucket.com/albums/d164/Bahlzeron/20160405_130352_resized.jpg

[sleepyalero]

Not bad

[Babyblue]

Dropped her off at milzys today. Next time I get in her, it will have the 6 speed and 3.5

[Papa Rad17]

He going to fix the tuning issue with your power loss after start up?

[Babyblue]

He going to fix the tuning issue with your power loss after start up?

I'd hope soo. Haha.

[Bahlzeron]

Dropped her off at milzys today. Next time I get in her, it will have the 6 speed and 3.5

Nice!....though I love DOHC fours, I admit I'm a bit jealous. edit to add... What part of GR ya from BB? I'm over in Wyoming, 36th and Burlingame area.

A little off topic, but...
How hard is it to swap cruise control switches? found a couple aleros in the junk yard with them in real nice condition, mine the lettering is wearing off, and look rather bad. Also what parts would I wanna grab off a '95 Achieva S? other than intake cam.. on second thought I'll grab both cams.. hunting down the exhaust secret cam will be more effort than I wanna do.. also are the cams drop in and go, or is there modification needed? (i.e. take the same timing gears.. I just did timing set in January)

[sleepyalero]

Bolts are behind the air bag... Have fun!

[Babyblue]

Nice!....though I love DOHC fours, I admit I'm a bit jealous. edit to add... What part of GR ya from BB? I'm over in Wyoming, 36th and Burlingame area.

A little off topic, but...
How hard is it to swap cruise control switches? found a couple aleros in the junk yard with them in real nice condition, mine the lettering is wearing off, and look rather bad. Also what parts would I wanna grab off a '95 Achieva S? other than intake cam.. on second thought I'll grab both cams.. hunting down the exhaust secret cam will be more effort than I wanna do.. also are the cams drop in and go, or is there modification needed? (i.e. take the same timing gears.. I just did timing set in January)

I live in alto. Just outside of lowell. When I get her back we should meet up.

[Bahlzeron]

I live in alto. Just outside of lowell. When I get her back we should meet up.

:thumb: sounds good!

[bentlyf1]

Washed and buffed and rotated the tires. now ready for the summer of cruising

[tw0123]

Went to a car show on Sunday :)

http://i1371.photobucket.com/albums/ag311/tw012379/Mobile%20Uploads/imagejpeg_3_zpsudlqth5n.jpg (http://s1371.photobucket.com/user/tw012379/media/Mobile%20Uploads/imagejpeg_3_zpsudlqth5n.jpg.html)

[Bahlzeron]

http://i35.photobucket.com/albums/d164/Bahlzeron/20160415_183500_resized.jpg

Going to paint the calipers and the scallops on the sides the same color.

[AbHeLlRaZoR]

Not today but, Saturday we got the stock manifold off, only broke one stud but a bolt extractor took it right out. 7 of the other studs pulled right out, 2 the bolt came off clean so we didnt pull those. We got the new studs in, thermostat replaced. and the new manifold on. Turns out I had to modify the brake booster vacuum line a pinch so we left the rest for next weekend. Hope to have all the other goodies put on and ready for exhaust by the end of the week.

I don't like quoting such an old post but what header did you go with? Was it designed for the N-body, or was it designed for either J-body(Cavalier/Sunfire) or Delta (Cobalt/G5) cars?

[Papa Rad17]

The listing was titled as "Chevy Cavalier Malibu Grand AM Sunfire 2.2L Exhaust Manifold Performance Header" I believe its the same design as the M2 one on ebay (where I got mine as well). Its still on there, been on for about a year. Still in good shape, everything is holding up. I didn't use the gasket it came with. used 'Copper' gasket maker.

[zzyzzx]

I renewed my Alero registration today. Might even start driving it next week. I don't drive it in the winter.

[Redog]

Parked it in the garage about 2 weeks ago. Suspended the insurance :(

[Papa Rad17]

Parked it in the garage about 2 weeks ago. Suspended the insurance :(
:cry:


Renewed the registration last week. Today I installed a new eyelet on the negative amp cable, and drove it up town to get a spare key cut for the Intrigue. I think its time for some new front brake pads. BabyBlue's old setup is finally nearing it's end days after being installed used 2 years ago at homecoming. GM Parts Direct finally shipped out my new coil pack bolts yesterday, after two weeks! Next week she'll go in the garage to extract the old ones and get some fresh brake pads. 231,137 miles when I pulled into the car port earlier, still rips through the gears just fine. :awesome:

[aroundincircles]

Changed the oil... Basic I know, but it needed to be done.

[tw0123]

i looked at mine last night... I was away for 4 days and missed her lol

[CharmfulPeace]

Today I put in some LED's under my driver side dash (Will move second over to Passenger side yet)
http://obc.superclans.com/Peace/alero/LED1.jpg

http://obc.superclans.com/Peace/alero/LED3.jpg

Figured that, instead of drilling holes in the trim or dash, I would use the little cubby to the left of the steering wheel for the switch
http://obc.superclans.com/Peace/alero/LED2.jpg

Also Painted my front emblem.
http://obc.superclans.com/Peace/alero/Emblem2.jpg

http://obc.superclans.com/Peace/alero/Emblem1.jpg

Sorry about the size of the images.. heh..

Also want to look at getting Izzy repainted yet because of the many spots where the paint has come off.

[CharmfulPeace]

Got my double din put in her a few days ago http://i73.photobucket.com/albums/i238/Baby_blue1993/Mobile%20Uploads/VZM.IMG_20160228_143110_zpszx8wcjnn.jpg[/URL]

Quoting a 3-4-month-old post, I know, but wanted to point out that I am planning on getting one of these in Izzy and hooking it up to a back-up camera as someone else on here did. Great idea there as I am going from driving a 2014 Dodge Dart Limited alone (Which is the fully loaded Dart) back to my Alero since I can drive her again.

Might have gotten lazy with the back-up cam in the Dart :lol:

[AleroCzak]

This is what my setup looks like now. (image may be crap; it was taken with a 20 megapixel camera and reduced to 650 px^2)
These are the parts I used, Mr. CharmfulPeace:
Antenna adapter (https://www.amazon.com/Oldsmobile-1999-2004-Factory-Aftermarket-Antenna/dp/B019HHPTKC/ref=pd_ybh_a_54?ie=UTF8&refRID=MKFXG82CEG60TH96N2CS)
Class 2 Data Bus Interface (https://www.amazon.com/Metra-LC-GMRC-01-Class-Data-Interface/dp/B001XOBU4C/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1467342416&sr=1-1-catcorr&keywords=metra+gm+class+II)
Compact Camera (https://www.amazon.com/Esky-EC170-11-Smallest-Waterproof-Rearview/dp/B00H3ZN3JK/ref=sr_1_1?s=car&ie=UTF8&qid=1467342571&sr=1-1&keywords=esky+camera)
Head Unit Mounting Bracket (https://www.amazon.com/Metra-Electronics-95-2001-Installation-Vehicles/dp/B003D3NEEU/ref=pd_sim_sbs_107_2?ie=UTF8&dpID=41f52c3z2ZL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=W50HJSFCHYHPQDSSW1N9)
Hope you find this useful!

[CharmfulPeace]

This is what my setup looks like now. (image may be crap; it was taken with a 20 megapixel camera and reduced to 650 px^2)
These are the parts I used, Mr. CharmfulPeace:
Antenna adapter (https://www.amazon.com/Oldsmobile-1999-2004-Factory-Aftermarket-Antenna/dp/B019HHPTKC/ref=pd_ybh_a_54?ie=UTF8&refRID=MKFXG82CEG60TH96N2CS)
Class 2 Data Bus Interface (https://www.amazon.com/Metra-LC-GMRC-01-Class-Data-Interface/dp/B001XOBU4C/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1467342416&sr=1-1-catcorr&keywords=metra+gm+class+II)
Compact Camera (https://www.amazon.com/Esky-EC170-11-Smallest-Waterproof-Rearview/dp/B00H3ZN3JK/ref=sr_1_1?s=car&ie=UTF8&qid=1467342571&sr=1-1&keywords=esky+camera)
Head Unit Mounting Bracket (https://www.amazon.com/Metra-Electronics-95-2001-Installation-Vehicles/dp/B003D3NEEU/ref=pd_sim_sbs_107_2?ie=UTF8&dpID=41f52c3z2ZL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=W50HJSFCHYHPQDSSW1N9)
Hope you find this useful!

Thank you very much, Mr. AleroCzak! I will be sure to make a list of that stuff for when I get around to doing it!

[CharmfulPeace]

Also picked up a Standard shift knob (http://www.walmart.ca/en/ip/blackchrome-shift-knob/6000001851706) a couple years back and have decided to try and do some makeshift modifications to the knob itself so that I can use it on Izzy (Who is an auto).

Already have some ideas.. The main of which being that I get something like a copper pipe that would be able to fit inside of the knob while also being able to nicely fit over the shaft so that I can use a "Push down" movement in order to shift gears.

I've already gotten out my calliper and the knob is pretty much just 2mm bigger than the shaft, so shouldn't take much to make it work.

I just don't really like the stock shifter knob and have been looking for a project to do for the longest time! Will definitely upload pics when I am done to show you guys how it turned out.

[CharmfulPeace]

Today I did a little extra work to Izzy..

Painted the sliding pieces along the shifter bezel (Not sure what they're called :haha: )

http://obc.superclans.com/Peace/alero/shiftpaint.jpg

[Babyblue]

Not today..yesterday, I took the carpet out and brought it to the self car wash and cleaned it. Going to give her a extreme cleaning makeover today on the rest of the interior.

[Papa Rad17]

Drove it for the first time in a little over 3 months. She's been down waiting on new parts. Back on the road with 231,725 miles. New rear hubs, parking shoes, and struts, as well as new calipers in the front.
My parking brake still doesnt hold worth a crap. The rotor is hardly wore and the shoes adjusted as far as will allow. With it pulled nearly vertical I can still roll the car with ease. Anyone hear of the cables stretching before?

[sleepyalero]

Mine sucks ass too. There an adjustment point somewhere else to my knowledge but i forget where. I believe my cable is stretched too.

[tw0123]

From a couple weeks ago...

http://i1371.photobucket.com/albums/ag311/tw012379/FB_IMG_1470103861782_zpshbdpshf9.jpg (http://s1371.photobucket.com/user/tw012379/media/FB_IMG_1470103861782_zpshbdpshf9.jpg.html)

[03Alerosil]

From what I have read and understand the parking brake is self adjusting

[Papa Rad17]

Mine sucks ass too. There an adjustment point somewhere else to my knowledge but i forget where. I believe my cable is stretched too.

If you find it let me know. I hate having to park in gear sometimes. I looked up in the handle assembly but couldn't find anything.
If you ever make it to a junk yard I need those coil pack bolts :coolio:

and Tim! Lets see the ass of that beauty!

[03Alerosil]

If you find it let me know. I hate having to park in gear sometimes. I looked up in the handle assembly but couldn't find anything.
If you ever make it to a junk yard I need those coil pack bolts :coolio:

and Tim! Lets see the ass of that beauty!


I looked up the parking brake adjustment using the repair manuals I have access to using prodemand and according to what I read it's self adjusting. Cables must be stretched.

[tw0123]

I'll have to get a picture Alex... Surprisingly no one got one of the back lol

[zzyzzx]

I took apart my key FOB and cleaned out the insides and cleaned the button contacts (this is really why I did this). The key FOB now works perfectly.

[Papa Rad17]

I looked up the parking brake adjustment using the repair manuals I have access to using prodemand and according to what I read it's self adjusting. Cables must be stretched.

That's the only possible thing I could think of. Would it be possible for the springs to get weak enough to allow it to not engage at all? As much 'umf' as it took to get them re-hooked I just don't see them being THAT weak.

I'll have to get a picture Alex... Surprisingly no one got one of the back lol

It's so dead here :( I however would love to have as many pictures as you can take. Will it be re-painted the factory bronze mist?
and on a side note- did you get my email?

[tw0123]

Lol yeah i just got it... And replied!!

As for the car, she will be repainted the bronze mist, i love the colour so I'm not going to change out!!! I was hoping to have the kit finished by now so i could have her painted by now, but i sold my lowering suspension so i had to focus on finishing the air ride before i could get back into the body work... Another set back but what else is new lol... Now time is against me for having it painted this summer as my wife already has September booked and the first 3 weeks of October filled as well...

Getting old sucks, it's getting harder to stay motivated after working a 14hr day to go out to work on the car... :(

[tw0123]

Here ya go Alex ;)http://i1371.photobucket.com/albums/ag311/tw012379/Mobile%20Uploads/20160827_091804_HDR_zpsuoognypc.jpg (http://s1371.photobucket.com/user/tw012379/media/Mobile%20Uploads/20160827_091804_HDR_zpsuoognypc.jpg.html)

[tw0123]

http://i1371.photobucket.com/albums/ag311/tw012379/Mobile%20Uploads/20160827_091831_HDR_zpswxmhen6c.jpg (http://s1371.photobucket.com/user/tw012379/media/Mobile%20Uploads/20160827_091831_HDR_zpswxmhen6c.jpg.html)

[Papa Rad17]

I filled up for the first time since I've driving the alero again. I was extremely happy to find I am again achieving 31.7 mpgs! Pore old thing still needs some work in the front drivetrain and suspension. 231,973 miles as of tonight.

[zzyzzx]

I changed the oil in my Alero today. I'm up to 47K miles on my 1999 now. I don't normally drive this car in th winter, but the timing belt broke on my winter beater and I am waiting for the part in the mail. Note: Don't ever mail order car parts from Amazon in late December. D-oh!

[Garion1076]

Wasn't exactly today (been a bit busy with year-end work activities) but I did do it recently. :blush:

Made my Alero a big brother...well, an older one anyways.

The Camaro will serve as the benchmark for all future mods - just kidding.

Seriously though, my Alero remains my first love (call me crazy) and still runs as great as that first day some 107k miles and nearly 16 years ago! Rust is about the only thing that'll eventually part me with it. :lol:

[Papa Rad17]

^wicked!

Drove it to/from work again. Front wheel hubs howling for their poor life to end. Going on stands again soon for the front suspension/drive train rebuild.

[Alerodriver17]

Drove it to school and back and had a blast doing so. Lol

[tw0123]

I went and looked at mine yesterday... Installed the billet caps i bought last summer finally...

More to come as summer gets here...

[Nate's Alero]

Still around. Washed and waxed. Love washing off salt only to have paint come with it and show rust.

[Shy]

A new* power side mirror switch installed in the Alero. The refurbished part came from Switch City USA via ebay. Worth the 14.99 (including shipping and handling) to get the control back after years of it being inoperative. Although it fits perfectly into the holster I believe the switch came out of an Intrigue because the face of the switch is far more contoured.

[Bahlzeron]

Installed GAGT dual post mirrors

[Babyblue]

Yesterday I washed, clay bared, polished, cleaner wax, and paste waxed her. looked real good after. I had to drive around.

[Oldsman]

ready poly primer.........then get to start putting on new toys.......then final prime and then paint.

[Papa Rad17]

Been a while! :thumb: